GE Healthcare · MROvationSigna2225554
Multicoil T/R Driver faults (always on port 4) only with the USAI Large Knee coil.
Symptom
Multicoil T/R Driver faults (always on port 4) only with the USAI Large Knee coil. Signa Ovation could not scan with the USAI Large Knee coil. All other coils worked fine. The coil was replaced but still the failure occurs.
Error message
2225554 Multi-Coil T/R Driver Board Fault. An Open Circuit was Detected on Port 4. Thu Aug 21 12:06:10 1997 Suite: MRS1 Host: OC0 Proc: HPC_PORT_ID Error: 2225554 File: PMH.m 1.29 Method: spi_tr_mon Line: 6260 Multi-Coil T/R Driver Board Fault. An open circuit was detected on port 4. Check cable to multi-coil board or check for an open pin diode.
Applies to
- Models
- Ovation, Signa
- Product
- Ovation/MFO
- Software
- MFO3 Applies to Ovation3 with HP4000 computer running Linux OS.
- Area
- MR
Full cause & step-by-step resolution
The complete cause analysis, the step-by-step remedy for this GE Healthcare MR issue are available to FSELIB subscribers — re-authored, web-first, searchable.
7-day free trial · no credit card required
Related GE Healthcare MR issues
- Running grafidy3, and find there are spikes on the waveforms in the manual prescan display, both windows.
- CWA ID100060 Unable To Film.
- Fails to Scan with TORSO Coil.
- The Carriage Fails to Advance to Latch to the Table and to Retract When it is Raised, Undocked or Lowered.
- AE title has changed on destination host.
- CWA ID100315. Auto and Manual Prescan Fails.