GE Healthcare · MRSigna
Unable to Scan.
Symptom
Unable to Scan. Power Monitor B Status is always Inhibit for Body and Head Modes. The "Inhibit" LED on the SSM is always illuminated for Power Monitor "B". If FE inserts jumper JP1 on the APM (Analog Power Monitor) board inside the SSM (System Support Module) to bypass power monitor "B", the system will scan. But of course this is not permitted for patient scanning.
Applies to
- Models
- Signa
- Product
- Signa LX Signa LX Product can be used with 8.x and 9.x systems.
- Software
- 9.1 For Signa LX product only
- Area
- MR
Full cause & step-by-step resolution
The complete cause analysis, the step-by-step remedy for this GE Healthcare MR issue are available to FSELIB subscribers — re-authored, web-first, searchable.
7-day free trial · no credit card required
Related GE Healthcare MR issues
- Running grafidy3, and find there are spikes on the waveforms in the manual prescan display, both windows.
- Fails to Scan with TORSO Coil.
- The Carriage Fails to Advance to Latch to the Table and to Retract When it is Raised, Undocked or Lowered.
- AE title has changed on destination host.
- CWA ID100315. Auto and Manual Prescan Fails.
- What is the Acoustic Noise Level in the Ovation Magnet.