GE Healthcare · X-ray R&FDefinium
Def8000 During Application software load on the Magic PC the OS software loads from the DVD with no problems.
Definium 8000 FMI 10789 Software Load Problem
Symptom
Def8000 During Application software load on the Magic PC the OS software loads from the DVD with no problems. Application software starts to load from the CD. At approx. 11%, the software load errors out with the following message: Installation of package "/mnt/cdrom/GDXE/RPMS/IIPClassM-3.3.11-1.i386.rpm" failed. Installation of all subsequent packages also fails. Other Application CDs were tried with the same results.
Error message
Installation of package "/mnt/cdrom/GDXE/RPMS/IIPClassM-3.3.11-1.i386.rpm" failed.
Applies to
- Models
- Definium
- Product
- Definium 8000
- Software
- Revolution XR/d 2X Platform (Lightning) – M4
- Component
- HP Magic PC
- Area
- X-ray R&F
Full cause & step-by-step resolution
The complete cause analysis, the step-by-step remedy for this GE Healthcare X-ray R&F issue are available to FSELIB subscribers — re-authored, web-first, searchable.
7-day free trial · no credit card required
Related GE Healthcare X-ray R&F issues
- AEC Backup Time message
- Definium 8000 Auto positioning does not work after a reset/reboot due to wall stand receptor at a hard limit during rebooting or repowering.
- Definium 8000 One or both monitors display the following message on every boot
- Definium 8000 Wallstand or Table Only Configurations running VolumeRAD M3 Software.
- Definium 8000 OTS Collimator has no power due to a tripped breaker (CB8) ont he Tube Suspension Logic (TSL) Board.
- Definium 8000 The Siemens Collimator has not power due to a tripped breaker (CB9) on the Tube Suspension Logic (TSL) Board.