GE Healthcare · MRSigna
Improper Network Speed Setting Causes Slow Image Transfers.
Symptom
How to Set the MRI Network to a Fixed Speed and Duplex Some Hospital networks do not support or perform well with the default setting of "auto negotiate" for the network interface speed and duplex. They may experience lots of network errors and slow transmission times. The site network people may ask you to set the MRI to a fixed speed and duplex.
Applies to
- Models
- Signa
- Product
- Signa LX Signa LX Product can be used with 8.x and 9.x systems.
- Software
- 9.1 For Signa LX product only
- Area
- MR
Full cause & step-by-step resolution
The complete cause analysis, the step-by-step remedy for this GE Healthcare MR issue are available to FSELIB subscribers — re-authored, web-first, searchable.
7-day free trial · no credit card required
Related GE Healthcare MR issues
- Running grafidy3, and find there are spikes on the waveforms in the manual prescan display, both windows.
- Fails to Scan with TORSO Coil.
- The Carriage Fails to Advance to Latch to the Table and to Retract When it is Raised, Undocked or Lowered.
- AE title has changed on destination host.
- CWA ID100315. Auto and Manual Prescan Fails.
- What is the Acoustic Noise Level in the Ovation Magnet.