Def8000 M4 Error Log for Single Detector Configurations?

Symptom

Error message

Error 2391 "XRS",3400005, The system is booting.,2222,DO,DEFAULT, SysCntrl, Control, computer,1,1,1,(null),XRSysMgr.cpp,179

Error 4206 "VEN",1090201, Table IO CANopen Communication Failed,2222,WR,DEFAULT, Pos, DeviceGroup 1. Check CAN cable connections and terminations. 2. Check table power supply connections and fuses. 3. Check connections between table I/O board.,1,1,1, table io Disconnected,../DeviceGroup/RadTableDevice/RadTableDevice.cpp,1268

Error 2393 "VEN",1090431, WS LogicBoard is not alive,2222,AR,DEFAULT, Pos, DeviceGroup, Retry or reset the system,1,1,1, Error Report: WallStand Logical Board Node is not alive.,../DeviceGroup/ThunderWSDevice/ThunderWSDevice.cpp,3107

Error 2394 "VEN",1090220, Wallstand CANopen display board communication failure,2222,WR,DEFAULT, Pos, control 1. Check CANopen cable connections and terminations. 2. Check Wall Stand power supply connections and fuses. 3. Check WS display connections. 4. Replace WS display module. 5. Replace WS I/O board.,1,1,1, Error Report: WallStand Logical Board Node is not alive.,../DeviceGroup/ThunderWSDevice/ThunderWSDevice.cpp,2052

Error 4207 "XRS",3400017, System boot successful,2222,DO,DEFAULT, SysCntrl, Control,

Applies to

Models

Definium

Product

Definium 8000

Software

Revolution XR/d 2X Platform (Lightning) – M4

Area

X-ray R&F

Related GE Healthcare X-ray R&F issues

• AEC Backup Time message
• Definium 8000 Auto positioning does not work after a reset/reboot due to wall stand receptor at a hard limit during rebooting or repowering.
• Definium 8000 One or both monitors display the following message on every boot
• Definium 8000 Wallstand or Table Only Configurations running VolumeRAD M3 Software.
• Definium 8000 OTS Collimator has no power due to a tripped breaker (CB8) ont he Tube Suspension Logic (TSL) Board.
• Definium 8000 The Siemens Collimator has not power due to a tripped breaker (CB9) on the Tube Suspension Logic (TSL) Board.