VG Intermittently tube pattern is displayed in part of the image on only one detector.
Symptom
VG Intermittently tube pattern is displayed in part of the image on only one detector. Cobalt (Co57) floods seem to manifest the problem more often. VG Intermittently tube pattern is displayed in part of the image on only one detector. Cobalt (Co57) floods seem to manifest the problem more often. Frequently the tube pattern is not displayed across the entire image. A corner of the flood may or may not be affected (problem is manifested only in a corner of the flood or only a corner of the flood will not be affected). Eventually there will be a peak shift (or will see pha change during an acquisition) in both Tc99 and Co57 floods.
Applies to
- Models
- Millennium
- Product
- VGH VG and VG Hawkey and Varicam
- Component
- *Detector (Imaging Detector) *Detector (Imaging Detector) *Detector (Imaging Detector) PCA000412 VG CDOC Card (same as PCA000406 same as 5252407) PCA000412 VG CDOC Card (same as PCA000406 same as 5252407) PCA000412 VG CDOC Card (same as PCA000406 same as 5252407)
- Area
- Nuclear Medicine
Full cause & step-by-step resolution
The complete cause analysis, the step-by-step remedy for this GE Healthcare Nuclear Medicine issue are available to FSELIB subscribers — re-authored, web-first, searchable.
7-day free trial · no credit card required
Related GE Healthcare Nuclear Medicine issues
- How do I capture and print COR and Camera Uniformity (CUA) result screens on Genieacq, then send to a processing station for ACR
- Collision and E-stop lights are red on the back of the gantry and no movement with Hand Held Controller (HHC) or the genieacq.
- Need part numbers for the Millennium MG/MC table E-Stop
- How do I Delete a file on Genieacq that the system thinks is still acquiring
- VG, the contour works... but in the opposite way.
- MG_MC_MyoSight_MPR_MPS Bar Phantom Resolution Size