Unable to Load Boot/Update CDROM when Loading IRIX 6.5 Operating System.
Symptom
Unable to Load Boot/Update CDROM when Loading IRIX 6.5 Operating System. Message is returned "unable to execute - unable to load dksc(1,3,8)sash64", and nothing else happens FE had just replaced the CD/DVD Drive. FE trying to reload 9.1 software and could not load the Boot/Update disk to load the IRIX 6.5 operating system. Error message is returned "unable to execute - unable to load dksc(1,3,8)sash64", and nothing else happens. Afterwards, as a test, we verified that we could mount a "patch" CDROM just to verify the CD-DVD Drive was working, by entering "mediad" with the "patch" CDROM in the drive. FE had just replaced the CD/DVD Drive. FE trying to reload 9.1 software and could not load the Boot/Update disk to load the IRIX 6.5 operating system. After entering the command "boot -f dksc(1,3,8)sash64 dksc(1,3,7)stand/fx.64 --x <Enter>", an error message is returned "unable to execute - unable to load dksc(1,3,8)sash64", and nothing else happens. Afterwards, as a test, we verified that we could mount a "patch" CDROM just to verify that the CD-DVD Drive was working, by entering "mediad" with the "patch" CDROM in the drive..
Error message
unable to execute - unable to load dksc(1,3,8)sash64 Message appears after entering the command "boot -f dksc(1,3,8)sash64 dksc(1,3,7)stand/fx.64 --x ". Message appears after entering the command "boot -f dksc(1,3,8)sash64 dksc(1,3,7)stand/fx.64 --x <Enter>"
Applies to
- Models
- Signa
- Product
- Signa LX Signa LX Product can be used with 8.x and 9.x systems.
- Software
- 9.1 For Signa LX product only
- Area
- MR
Full cause & step-by-step resolution
The complete cause analysis, the step-by-step remedy for this GE Healthcare MR issue are available to FSELIB subscribers — re-authored, web-first, searchable.
7-day free trial · no credit card required
Related GE Healthcare MR issues
- Running grafidy3, and find there are spikes on the waveforms in the manual prescan display, both windows.
- Fails to Scan with TORSO Coil.
- The Carriage Fails to Advance to Latch to the Table and to Retract When it is Raised, Undocked or Lowered.
- AE title has changed on destination host.
- CWA ID100315. Auto and Manual Prescan Fails.
- What is the Acoustic Noise Level in the Ovation Magnet.