GE Healthcare · Nuclear Medicine
Maxxus Table will not Move or Calibrate, and is Not on any limit switches
Symptom
Maxxus Table will not Move or Calibrate, and is Not on any limit switches Something else to try after you have PWR reset the gantry and still have table issues. Maxxus Table will not Move or Calibrate, and is Not on any limit switches. Something else to try after you have PWR reset the gantry and still have table issues.
Applies to
- Product
- Maxxus Maxxus product Maxxus product
- Component
- *Patient Table *Patient Table *Patient Table
- Area
- Nuclear Medicine
Full cause & step-by-step resolution
The complete cause analysis, the step-by-step remedy for this GE Healthcare Nuclear Medicine issue are available to FSELIB subscribers — re-authored, web-first, searchable.
7-day free trial · no credit card required
Related GE Healthcare Nuclear Medicine issues
- Muga patch FMI 40788 when loaded does not indicate it completed
- How do I capture and print COR and Camera Uniformity (CUA) result screens on Genieacq, then send to a processing station for ACR
- Part number needed for Optima E-Stop
- Collision and E-stop lights are red on the back of the gantry and no movement with Hand Held Controller (HHC) or the genieacq.
- Service Note 43783_1 Feb/08 Infinia/Ventri/Xeleris 1.1 & 2
- Need part numbers for the Millennium MG/MC table E-Stop