GE Healthcare · Nuclear MedicineMillennium
MPR which when going to the preprogrammed motion (PPM) "under the table'" position, the detector Tilt position is not at…
MPR which when going to the preprogrammed motion (PPM) "under the table'" position, the detector Tilt position is not at zero (0) degrees.
Symptom
MPR which when going to the preprogrammed motion (PPM) "under the table'" position, the detector Tilt position is not at zero (0) degrees. When using the PPM Detector Under Table, the detector Tilt position moves to about -6 degrees facing out when rotation is at 180 degrees, detector under the table position. Problem occured after upgrading from Genieacq 2.5.1 to 4.0 software.
Applies to
- Models
- Millennium
- Product
- MPR/MPS Millennium MPR Millennium MPS
- Software
- Genieacq 4.0 Genieacq 4.0
- Component
- *Gantry Gantry Gantry
- Area
- Nuclear Medicine
Full cause & step-by-step resolution
The complete cause analysis, the step-by-step remedy for this GE Healthcare Nuclear Medicine issue are available to FSELIB subscribers — re-authored, web-first, searchable.
7-day free trial · no credit card required
Related GE Healthcare Nuclear Medicine issues
- How do I capture and print COR and Camera Uniformity (CUA) result screens on Genieacq, then send to a processing station for ACR
- Collision and E-stop lights are red on the back of the gantry and no movement with Hand Held Controller (HHC) or the genieacq.
- Need part numbers for the Millennium MG/MC table E-Stop
- How do I Delete a file on Genieacq that the system thinks is still acquiring
- VG, the contour works... but in the opposite way.
- MG_MC_MyoSight_MPR_MPS Bar Phantom Resolution Size