It is sometimes difficult to attach the lifting brackets to the SGA or HFA FRUs.
Symptom
It is sometimes difficult to attach the lifting brackets to the SGA or HFA FRUs See Long Description. Also see Resolution concept for the complete SMILe released 1/26/07 See Resolution concept for the complete SMILe released 1/26/07 Subject: Safe Removal of SGA or HFA FRU From Container. Effectivity: All 1.5T and 3.0T Signa LX, EXCITE, HD, and HDx MR systems with ACGD or HFD Cabinet. Problem: HFA FRU part number 2393906-2 and SGA FRU part number 2270055-2 are shipped in hard plastic FRU cases with a padded interior. It is sometimes difficult to attach the lifting brackets to the SGA or HFA while it is in the FRU case so that it can be hoisted out of the container. The SGA and HFA parts each weigh 150 lb. (68kg) and so should never be lifted out of the container by one person.
Applies to
- Models
- Signa
- Product
- Signa LX Signa LX Product can be used with 8.x and 9.x systems.
- Software
- 9.1 For Signa LX product only
- Component
- 2393906-2 HFA ASSEMBLY WITH FRU PACKAGING 2393906-2 HFA ASSEMBLY WITH FRU PACKAGING Same notes apply to 2393906-4 which is HFA ASSEMBLY WITH FRU PACKAGING and lift brackets. 2393906-2 HFA ASSEMBLY WITH FRU PACKAGING 2270055-2 or T3504MG ACGD SGA Module ACGD SGA Module 2270055-2 or T3504MG. Note: You can see SGA Amplifiers on HDx systems when they were upgraded to HDX from 11.0. The original SGA's were kept and only the Control boards were upgraded. ACGD SGA Module 2270055-2 or T3504MG. Note: You can see SGA Amplifiers on HDx systems when they were upgraded to HDX from 11.0. The original SGA's were kept and only the Control boards were upgraded.
- Area
- MR
Full cause & step-by-step resolution
The complete cause analysis, the step-by-step remedy and the attached service documents for this GE Healthcare MR issue are available to FSELIB subscribers — re-authored, web-first, searchable.
7-day free trial · no credit card required
Related GE Healthcare MR issues
- Running grafidy3, and find there are spikes on the waveforms in the manual prescan display, both windows.
- Fails to Scan with TORSO Coil.
- The Carriage Fails to Advance to Latch to the Table and to Retract When it is Raised, Undocked or Lowered.
- AE title has changed on destination host.
- CWA ID100315. Auto and Manual Prescan Fails.
- What is the Acoustic Noise Level in the Ovation Magnet.