GE Healthcare · CTLightSpeed18511118261332053
LightSpeed 4.X - Octane
Symptom
Gantry-Table interfernece problems prevented scanning
Error message
Error: 185111, HW error: Tilt Interference/Limit switches are INVALID See LD for complete error Mon Nov 28 14:39:35 2005 Error: 185111 Host: ETC Process: Control File: etcValidIntfMatrix.c 1.8 7/9/ Line: 133 Function: No System Function Reported Scan: 0/0/0 Type: None/Unknown Exception Level: Pri/Most Severe Time: 1066 Log Series: 1 HW error: Tilt Interference/Limit switches are INVALID. Interference/Limit switches = 0xd2db. BCK LIMIT: 1 FWD LIMIT: 0 FWD INTF: 0 BCK INTF: 0 Error: 182613 HW/SW error: Motion was prohibited by the hardware Limit switches. See LD for more details Fri Jan 12 02:57:09 2007 Error: 182613 Host: ETC Process: Tilt File: tmcControl.c 1.27 8/26/94 Line: 176 Function: PATIENT ANATOMY POSITIONING : Elevation - Tilt Scan: 32053/2/1 Type: Helical Exception Level: Sec/Soft Time: 02:56:49:090 Log Series: 57 HW/SW error: Motion was prohibited by the hardware Limit switches. Hardware Inhibit Switches 0x90dc Current Position -284 (.01 deg) Dir 0 (BCK:0 FWD:1) Characterization Limits -3000 (.01 deg) 3000 (.01 deg)
Applies to
- Models
- LightSpeed
- Product
- LightSpeed 4.X - Octane sw_version: 405I.2_H4.0M5 LightSpeed 4.X - Octane Gantry Model # 2339985 Console Model #'s 2341923 and 2341923-2(D3D) check_config shows LightSpeed 16 / LightSpeed 16 Product: LightSpeed16 sw_version: 405I.2_H4.0M5 or newer machine_type: Octane host_id: 3232297858 tube_type: 15 Links to the updated Product Service Manuals, FMIs, Service Notes, Option Manuals and Operator Documents can be found online at the attached sites. Always use the most appropriate documentation for your system.
- Area
- CT
Full cause & step-by-step resolution
The complete cause analysis, the step-by-step remedy and the attached service documents for this GE Healthcare CT issue are available to FSELIB subscribers — re-authored, web-first, searchable.
7-day free trial · no credit card required