GE Healthcare · MRSigna
When they went to filming the left click wouldn't work, but the mouse cursor would move Due to PPS option had IP address…
When they went to filming the left click wouldn't work, but the mouse cursor would move Due to PPS option had IP address assigned but wasn't setup on broker.
Symptom
When they went to filming the left click wouldn't work , but the mouse cursor would move When they went to filming the left click wouldn't work , but the mouse cursor would move.
Applies to
- Models
- Signa
- Product
- Signa LX Signa LX Product can be used with 8.x and 9.x systems.
- Software
- 9.1 For Signa LX product only
- Component
- M1033PA Perform Procedure Step Option M1033PA is "Perform Procedure Step Option", an optional enhancement to ConnectPro. The option key name in software shows up as "pps".
- Area
- MR
Full cause & step-by-step resolution
The complete cause analysis, the step-by-step remedy for this GE Healthcare MR issue are available to FSELIB subscribers — re-authored, web-first, searchable.
7-day free trial · no credit card required
Related GE Healthcare MR issues
- Running grafidy3, and find there are spikes on the waveforms in the manual prescan display, both windows.
- Fails to Scan with TORSO Coil.
- The Carriage Fails to Advance to Latch to the Table and to Retract When it is Raised, Undocked or Lowered.
- AE title has changed on destination host.
- CWA ID100315. Auto and Manual Prescan Fails.
- What is the Acoustic Noise Level in the Ovation Magnet.