9.1 MDS Link Failure Only When Downloading Multicoil Scans

MDS Link Failure Only When Downloading Multi coil Scans See Long Description This is a Goldseal LX system running 9.1 software. FE is installing this Goldseal system. Whenever the system downloads a multicoil scan prescription, the system reports MDS Link faults pointing to the RF subsystem. When this happens all the SSM and RFI lights come on. The problem never happens in body or head modes, only in multicoil mode. The FE has already replaced everything on the MDS Link, including the SSM and GP. See below for an excerpt from the error log when this happens: Thu Aug 24 10:17:48 2006 2225693 1 lx-mr NSP HPC_PORT_ID:spi_mds 503 MDS link failure. An MDS device failed to respond to IPG. If the link is broken, a separate error message will be logged. If not, a spurious error occurred. Timer: 254 MDS header: 0x11 -(00/10 = Grad, 01/11 = RF Cabient) MDS opcode: 0x0B EN 342 Thu Aug 24 10:17:48 2006 2225699 1 lx-mr NSP HPC_PORT_ID:spi_mds 509 MDS link failure. An MDS device failed to respond to IPG on a 2nd try. If the link is broken, a separate error message will be logged. If not, a spurious error occurred. Timer: 509 MDS header: 0x11 -(00/10 = Grad, 01/11 = RF Cab) MDS opcode: 0x0B EN 351 Thu Aug 24 10:17:48 2006 2225512 1 lx-mr NSP HPC_PORT_ID:spi_tr_monitor 6235 Dynamic disable and T/R driver fault. A write to the driver board coil register failed to verify. EN 211 Thu Aug 24 10:17:48 2006 2225550 1 lx-mr NSP HPC_PORT_ID:spi_tr_mon 6300 Multi-coil array driver error. A write to the multi-coil array driver coil register failed to verify. Possible causes: bad board or connections in the TR chassis. Present State: 0x00 Requested State: 0x3C EN 315 Thu Aug 24 10:17:49 2006 2225693 1 lx-mr NSP HPC_PORT_ID:spi_mds 503 MDS link failure. An MDS device failed to respond to IPG. If the link is broken, a separate error message will be logged. If not, a spurious error occurred. Timer: 254 MDS header: 0x11 -(00/10 = Grad, 01/11 = RF Cabient) MDS opcode: 0x0B EN 342 Thu Aug 24 10:17:49 2006 2225699 1 lx-mr NSP HPC_PORT_ID:spi_mds 509 MDS link failure. An MDS device failed to respond to IPG on a 2nd try. If the link is broken, a separate error message will be logged. If not, a spurious error occurred. Timer: 509 MDS header: 0x11 -(00/10 = Grad, 01/11 = RF Cab) MDS opcode: 0x0B EN 351 Thu Aug 24 10:17:51 2006 2225693 1 lx-mr NSP HPC_PORT_ID:spi_mds 503 MDS link failure. An MDS device failed to respond to IPG. If the link is broken, a separate error message will be logged. If not, a spurious error occurred. Timer: 254 MDS header: 0x11 -(00/10 = Grad, 01/11 = RF Cabient) MDS opcode: 0x0B EN 342 Thu Aug 24 10:17:51 2006 2225699 1 lx-mr NSP HPC_PORT_ID:spi_mds 509 MDS link failure. An MDS device failed to respond to IPG on a 2nd try. If the link is broken, a separate error message will be logged. If not, a spurious error occurred. Timer: 509 MDS header: 0x11 -(00/10 = Grad, 01/11 = RF Cab) MDS opcode: 0x0B EN 351 Thu Aug 24 10:17:52 2006 2225739 2 lx-mr NSP HPC_PORT_ID:spi_rf_mon 3066 RF Interface (RFI) High Voltage Relay Fault. Possible causes: RF Monitor Cable to System Support Module (SSM) is disconnected or defective. Note: This fault may occur in conjunction with a Power Monitor Fault or when power cycling the SSM.-> EN 352 Thu Aug 24 10:17:52 2006 2225693 1 lx-mr NSP HPC_PORT_ID:spi_mds 503 MDS link failure. An MDS device failed to respond to IPG. If the link is broken, a separate error message will be logged. If not, a spurious error occurred. Timer: 254 MDS header: 0x11 -(00/10 = Grad, 01/11 = RF Cabient) MDS opcode: 0x0B EN 342 Thu Aug 24 10:17:53 2006 2225699 1 lx-mr NSP HPC_PORT_ID:spi_mds 509 MDS link failure. An MDS device failed to respond to IPG on a 2nd try. If the link is broken, a separate error message will be logged. If not, a spurious error occurred. Timer: 509 MDS header: 0x11 -(00/10 = Grad, 01/11 = RF Cab) MDS opcode: 0x0B EN 351 Thu Aug 24 10:17:54 2006 2225693 1 lx-mr NSP HPC_PORT_ID:spi_mds 503 MDS link failure. An MDS device failed to respond to IPG. If the link is broken, a separate error message will be logged. If not, a spurious error occurred. Timer: 254 MDS header: 0x11 -(00/10 = Grad, 01/11 = RF Cabient) MDS opcode: 0x0B EN 342 Thu Aug 24 10:17:54 2006 2225699 1 lx-mr NSP HPC_PORT_ID:spi_mds 509 MDS link failure. An MDS device failed to respond to IPG on a 2nd try. If the link is broken, a separate error message will be logged. If not, a spurious error occurred. Timer: 509 MDS header: 0x11 -(00/10 = Grad, 01/11 = RF Cab) MDS opcode: 0x0B EN 351 Thu Aug 24 10:17:55 2006 2225693 1 lx-mr NSP HPC_PORT_ID:spi_mds 503 MDS link failure. An MDS device failed to respond to IPG. If the link is broken, a separate error message will be logged. If not, a spurious error occurred. Timer: 254 MDS header: 0x11 -(00/10 = Grad, 01/11 = RF Cabient) MDS opcode: 0x0B EN 342 Thu Aug 24 10:17:56 2006 2225699 1 lx-mr NSP HPC_PORT_ID:spi_mds 509 MDS link failure. An MDS device failed to respond to IPG on a 2nd try. If the link is broken, a separate error message will be logged. If not, a spurious error occurred. Timer: 509 MDS header: 0x11 -(00/10 = Grad, 01/11 = RF Cab) MDS opcode: 0x0B EN 351 Thu Aug 24 10:17:57 2006 2225739 2 lx-mr NSP HPC_PORT_ID:spi_rf_mon 3066 RF Interface (RFI) High Voltage Relay Fault. Possible causes: RF Monitor Cable to System Support Module (SSM) is disconnected or defective. Note: This fault may occur in conjunction with a Power Monitor Fault or when power cycling the SSM.-> EN 352 Thu Aug 24 10:17:57 2006 2225693 1 lx-mr NSP HPC_PORT_ID:spi_mds 503 MDS link failure. An MDS device failed to respond to IPG. If the link is broken, a separate error message will be logged. If not, a spurious error occurred. Timer: 254 MDS header: 0x11 -(00/10 = Grad, 01/11 = RF Cabient) MDS opcode: 0x0B EN 342 Thu Aug 24 10:17:57 2006 2224667 1 lx-mr psc PscMainControl.cc 1305 Manual Prescan failed, T/R driver, dynamic disable is not ready. EN 169 Thu Aug 24 10:17:57 2006 2225699 1 lx-mr NSP HPC_PORT_ID:spi_mds 509 MDS link failure. An MDS device failed to respond to IPG on a 2nd try. If the link is broken, a separate error message will be logged. If not, a spurious error occurred. Timer: 509 MDS header: 0x11 -(00/10 = Grad, 01/11 = RF Cab) MDS opcode: 0x0B EN 351 Thu Aug 24 10:17:59 2006 2225693 1 lx-mr NSP HPC_PORT_ID:spi_mds 503 MDS link failure. An MDS device failed to respond to IPG. If the link is broken, a separate error message will be logged. If not, a spurious error occurred. Timer: 254 MDS header: 0x11 -(00/10 = Grad, 01/11 = RF Cabient) MDS opcode: 0x0B EN 342 Thu Aug 24 10:17:59 2006 2225699 1 lx-mr NSP HPC_PORT_ID:spi_mds 509 MDS link failure. An MDS device failed to respond to IPG on a 2nd try. If the link is broken, a separate error message will be logged. If not, a spurious error occurred. Timer: 509 MDS header: 0x11 -(00/10 = Grad, 01/11 = RF Cab) MDS opcode: 0x0B EN 351 Thu Aug 24 10:18:00 2006 2225693 1 lx-mr NSP HPC_PORT_ID:spi_mds 503 MDS link failure. An MDS device failed to respond to IPG. If the link is broken, a separate error message will be logged. If not, a spurious error occurred. Timer: 254 MDS header: 0x11 -(00/10 = Grad, 01/11 = RF Cabient) MDS opcode: 0x0B EN 342 Thu Aug 24 10:18:00 2006 2225699 1 lx-mr NSP HPC_PORT_ID:spi_mds 509 MDS link failure. An MDS device failed to respond to IPG on a 2nd try. If the link is broken, a separate error message will be logged. If not, a spurious error occurred. Timer: 509 MDS header: 0x11 -(00/10 = Grad, 01/11 = RF Cab) MDS opcode: 0x0B EN 351 Thu Aug 24 10:18:01 2006 2225739 2 lx-mr NSP HPC_PORT_ID:spi_rf_mon 3066 RF Interface (RFI) High Voltage Relay Fault. Possible causes: RF Monitor Cable to System Support Module (SSM) is disconnected or defective. Note: This fault may occur in conjunction with a Power Monitor Fault or when power cycling the SSM.-> EN 352 Thu Aug 24 10:18:02 2006 2225693 1 lx-mr NSP HPC_PORT_ID:spi_mds 503 MDS link failure. An MDS device failed to respond to IPG. If the link is broken, a separate error message will be logged. If not, a spurious error occurred. Timer: 254 MDS header: 0x11 -(00/10 = Grad, 01/11 = RF Cabient) MDS opcode: 0x0B EN 342 Thu Aug 24 10:18:02 2006 2225699 1 lx-mr NSP HPC_PORT_ID:spi_mds 509 MDS link failure. An MDS device failed to respond to IPG on a 2nd try. If the link is broken, a separate error message will be logged. If not, a spurious error occurred. Timer: 509 MDS header: 0x11 -(00/10 = Grad, 01/11 = RF Cab) MDS opcode: 0x0B EN 351 Thu Aug 24 10:18:03 2006 2225693 1 lx-mr NSP HPC_PORT_ID:spi_mds 503 MDS link failure. An MDS device failed to respond to IPG. If the link is broken, a separate error message will be logged. If not, a spurious error occurred. Timer: 254 MDS header: 0x11 -(00/10 = Grad, 01/11 = RF Cabient) MDS opcode: 0x0B EN 342 Thu Aug 24 10:18:03 2006 2225699 1 lx-mr NSP HPC_PORT_ID:spi_mds 509 MDS link failure. An MDS device failed to respond to IPG on a 2nd try. If the link is broken, a separate error message will be logged. If not, a spurious error occurred. Timer: 509 MDS header: 0x11 -(00/10 = Grad, 01/11 = RF Cab) MDS opcode: 0x0B EN 351 Thu Aug 24 10:18:04 2006 2225693 1 lx-mr NSP HPC_PORT_ID:spi_mds 503 MDS link failure. An MDS device failed to respond to IPG. If the link is broken, a separate error message will be logged. If not, a spurious error occurred. Timer: 254 MDS header: 0x11 -(00/10 = Grad, 01/11 = RF Cabient) MDS opcode: 0x0B EN 342 Thu Aug 24 10:18:05 2006 2225699 1 lx-mr NSP HPC_PORT_ID:spi_mds 509 MDS link failure. An MDS device failed to respond to IPG on a 2nd try. If the link is broken, a separate error message will be logged. If not, a spurious error occurred. Timer: 509 MDS header: 0x11 -(00/10 = Grad, 01/11 = RF Cab) MDS opcode: 0x0B EN 351 Thu Aug 24 10:18:06 2006 2225739 2 lx-mr NSP HPC_PORT_ID:spi_rf_mon 3066 RF Interface (RFI) High Voltage Relay Fault. Possible causes: RF Monitor Cable to System Support Module (SSM) is disconnected or defective. Note: This fault may occur in conjunction with a Power Monitor Fault or when power cycling the SSM.-> EN 352 Thu Aug 24 10:18:06 2006 2225693 1 lx-mr NSP HPC_PORT_ID:spi_mds 503 MDS link failure. An MDS device failed to respond to IPG. If the link is broken, a separate error message will be logged. If not, a spurious error occurred. Timer: 254 MDS header: 0x11 -(00/10 = Grad, 01/11 = RF Cabient) MDS opcode: 0x0B EN 342 Thu Aug 24 10:18:06 2006 2225699 1 lx-mr NSP HPC_PORT_ID:spi_mds 509 MDS link failure. An MDS device failed to respond to IPG on a 2nd try. If the link is broken, a separate error message will be logged. If not, a spurious error occurred. Timer: 509 MDS header: 0x11 -(00/10 = Grad, 01/11 = RF Cab) MDS opcode: 0x0B EN 351 Thu Aug 24 10:18:07 2006 2225693 1 lx-mr NSP HPC_PORT_ID:spi_mds 503 MDS link failure. An MDS device failed to respond to IPG. If the link is broken, a separate error message will be logged. If not, a spurious error occurred. Timer: 254 MDS header: 0x11 -(00/10 = Grad, 01/11 = RF Cabient) MDS opcode: 0x0B EN 342 Thu Aug 24 10:18:08 2006 2225699 1 lx-mr NSP HPC_PORT_ID:spi_mds 509 MDS link failure. An MDS device failed to respond to IPG on a 2nd try. If the link is broken, a separate error message will be logged. If not, a spurious error occurred. Timer: 509 MDS header: 0x11 -(00/10 = Grad, 01/11 = RF Cab) MDS opcode: 0x0B EN 351 Thu Aug 24 10:18:09 2006 2225693 1 lx-mr NSP HPC_PORT_ID:spi_mds 503 MDS link failure. An MDS device failed to respond to IPG. If the link is broken, a separate error message will be logged. If not, a spurious error occurred. Timer: 254 MDS header: 0x11 -(00/10 = Grad, 01/11 = RF Cabient) MDS opcode: 0x0B EN 342 Thu Aug 24 10:18:09 2006 2225699 1 lx-mr NSP HPC_PORT_ID:spi_mds 509 MDS link failure. An MDS device failed to respond to IPG on a 2nd try. If the link is broken, a separate error message will be logged. If not, a spurious error occurred. Timer: 509 MDS header: 0x11 -(00/10 = Grad, 01/11 = RF Cab) MDS opcode: 0x0B EN 351 Thu Aug 24 10:18:10 2006 2225739 2 lx-mr NSP HPC_PORT_ID:spi_rf_mon 3066 RF Interface (RFI) High Voltage Relay Fault. Possible causes: RF Monitor Cable to System Support Module (SSM) is disconnected or defective. Note: This fault may occur in conjunction with a Power Monitor Fault or when power cycling the SSM.-> EN 352 Thu Aug 24 10:18:10 2006 2225693 1 lx-mr NSP HPC_PORT_ID:spi_mds 503 MDS link failure. An MDS device failed to respond to IPG. If the link is broken, a separate error message will be logged. If not, a spurious error occurred. Timer: 254 MDS header: 0x11 -(00/10 = Grad, 01/11 = RF Cabient) MDS opcode: 0x0B EN 342 Thu Aug 24 10:18:11 2006 2225699 1 lx-mr NSP HPC_PORT_ID:spi_mds 509 MDS link failure. An MDS device failed to respond to IPG on a 2nd try. If the link is broken, a separate error message will be logged. If not, a spurious error occurred. Timer: 509 MDS header: 0x11 -(00/10 = Grad, 01/11 = RF Cab) MDS opcode: 0x0B EN 351 Thu Aug 24 10:18:12 2006 2225693 1 lx-mr NSP HPC_PORT_ID:spi_mds 503 MDS link failure. An MDS device failed to respond to IPG. If the link is broken, a separate error message will be logged. If not, a spurious error occurred. Timer: 254 MDS header: 0x11 -(00/10 = Grad, 01/11 = RF Cabient) MDS opcode: 0x0B EN 342 Thu Aug 24 10:18:12 2006 2225699 1 lx-mr NSP HPC_PORT_ID:spi_mds 509 MDS link failure. An MDS device failed to respond to IPG on a 2nd try. If the link is broken, a separate error message will be logged. If not, a spurious error occurred. Timer: 508 MDS header: 0x11 -(00/10 = Grad, 01/11 = RF Cab) MDS opcode: 0x0B Thu Aug 24 10:17:48 2006 2225693 1 lx-mr NSP HPC_PORT_ID:spi_mds 503 MDS link failure. An MDS device failed to respond to IPG. If the link is broken, a separate error message will be logged. If not, a spurious error occurred. Timer: 254 MDS header: 0x11 -(00/10 = Grad, 01/11 = RF Cabient) MDS opcode: 0x0B EN 342 Thu Aug 24 10:17:48 2006 2225699 1 lx-mr NSP HPC_PORT_ID:spi_mds 509 MDS link failure. An MDS device failed to respond to IPG on a 2nd try. If the link is broken, a separate error message will be logged. If not, a spurious error occurred. Timer: 509 MDS header: 0x11 -(00/10 = Grad, 01/11 = RF Cab) MDS opcode: 0x0B EN 351 Thu Aug 24 10:17:48 2006 2225512 1 lx-mr NSP HPC_PORT_ID:spi_tr_monitor 6235 Dynamic disable and T/R driver fault. A write to the driver board coil register failed to verify. EN 211 Thu Aug 24 10:17:48 2006 2225550 1 lx-mr NSP HPC_PORT_ID:spi_tr_mon 6300 Multi-coil array driver error. A write to the multi-coil array driver coil register failed to verify. Possible causes: bad board or connections in the TR chassis. Present State: 0x00 Requested State: 0x3C EN 315 Thu Aug 24 10:17:49 2006 2225693 1 lx-mr NSP HPC_PORT_ID:spi_mds 503 MDS link failure. An MDS device failed to respond to IPG. If the link is broken, a separate error message will be logged. If not, a spurious error occurred. Timer: 254 MDS header: 0x11 -(00/10 = Grad, 01/11 = RF Cabient) MDS opcode: 0x0B EN 342 Thu Aug 24 10:17:49 2006 2225699 1 lx-mr NSP HPC_PORT_ID:spi_mds 509 MDS link failure. An MDS device failed to respond to IPG on a 2nd try. If the link is broken, a separate error message will be logged. If not, a spurious error occurred. Timer: 509 MDS header: 0x11 -(00/10 = Grad, 01/11 = RF Cab) MDS opcode: 0x0B EN 351 Thu Aug 24 10:17:51 2006 2225693 1 lx-mr NSP HPC_PORT_ID:spi_mds 503 MDS link failure. An MDS device failed to respond to IPG. If the link is broken, a separate error message will be logged. If not, a spurious error occurred. Timer: 254 MDS header: 0x11 -(00/10 = Grad, 01/11 = RF Cabient) MDS opcode: 0x0B EN 342 Thu Aug 24 10:17:51 2006 2225699 1 lx-mr NSP HPC_PORT_ID:spi_mds 509 MDS link failure. An MDS device failed to respond to IPG on a 2nd try. If the link is broken, a separate error message will be logged. If not, a spurious error occurred. Timer: 509 MDS header: 0x11 -(00/10 = Grad, 01/11 = RF Cab) MDS opcode: 0x0B EN 351 Thu Aug 24 10:17:52 2006 2225739 2 lx-mr NSP HPC_PORT_ID:spi_rf_mon 3066 RF Interface (RFI) High Voltage Relay Fault. Possible causes: RF Monitor Cable to System Support Module (SSM) is disconnected or defective. Note: This fault may occur in conjunction with a Power Monitor Fault or when power cycling the SSM.-> EN 352 Thu Aug 24 10:17:52 2006 2225693 1 lx-mr NSP HPC_PORT_ID:spi_mds 503 MDS link failure. An MDS device failed to respond to IPG. If the link is broken, a separate error message will be logged. If not, a spurious error occurred. Timer: 254 MDS header: 0x11 -(00/10 = Grad, 01/11 = RF Cabient) MDS opcode: 0x0B EN 342 Thu Aug 24 10:17:53 2006 2225699 1 lx-mr NSP HPC_PORT_ID:spi_mds 509 MDS link failure. An MDS device failed to respond to IPG on a 2nd try. If the link is broken, a separate error message will be logged. If not, a spurious error occurred. Timer: 509 MDS header: 0x11 -(00/10 = Grad, 01/11 = RF Cab) MDS opcode: 0x0B EN 351 Thu Aug 24 10:17:54 2006 2225693 1 lx-mr NSP HPC_PORT_ID:spi_mds 503 MDS link failure. An MDS device failed to respond to IPG. If the link is broken, a separate error message will be logged. If not, a spurious error occurred. Timer: 254 MDS header: 0x11 -(00/10 = Grad, 01/11 = RF Cabient) MDS opcode: 0x0B EN 342 Thu Aug 24 10:17:54 2006 2225699 1 lx-mr NSP HPC_PORT_ID:spi_mds 509 MDS link failure. An MDS device failed to respond to IPG on a 2nd try. If the link is broken, a separate error message will be logged. If not, a spurious error occurred. Timer: 509 MDS header: 0x11 -(00/10 = Grad, 01/11 = RF Cab) MDS opcode: 0x0B EN 351 Thu Aug 24 10:17:55 2006 2225693 1 lx-mr NSP HPC_PORT_ID:spi_mds 503 MDS link failure. An MDS device failed to respond to IPG. If the link is broken, a separate error message will be logged. If not, a spurious error occurred. Timer: 254 MDS header: 0x11 -(00/10 = Grad, 01/11 = RF Cabient) MDS opcode: 0x0B EN 342 Thu Aug 24 10:17:56 2006 2225699 1 lx-mr NSP HPC_PORT_ID:spi_mds 509 MDS link failure. An MDS device failed to respond to IPG on a 2nd try. If the link is broken, a separate error message will be logged. If not, a spurious error occurred. Timer: 509 MDS header: 0x11 -(00/10 = Grad, 01/11 = RF Cab) MDS opcode: 0x0B EN 351 Thu Aug 24 10:17:57 2006 2225739 2 lx-mr NSP HPC_PORT_ID:spi_rf_mon 3066 RF Interface (RFI) High Voltage Relay Fault. Possible causes: RF Monitor Cable to System Support Module (SSM) is disconnected or defective. Note: This fault may occur in conjunction with a Power Monitor Fault or when power cycling the SSM.-> EN 352 Thu Aug 24 10:17:57 2006 2225693 1 lx-mr NSP HPC_PORT_ID:spi_mds 503 MDS link failure. An MDS device failed to respond to IPG. If the link is broken, a separate error message will be logged. If not, a spurious error occurred. Timer: 254 MDS header: 0x11 -(00/10 = Grad, 01/11 = RF Cabient) MDS opcode: 0x0B EN 342 Thu Aug 24 10:17:57 2006 2224667 1 lx-mr psc PscMainControl.cc 1305 Manual Prescan failed, T/R driver, dynamic disable is not ready. EN 169 Thu Aug 24 10:17:57 2006 2225699 1 lx-mr NSP HPC_PORT_ID:spi_mds 509 MDS link failure. An MDS device failed to respond to IPG on a 2nd try. If the link is broken, a separate error message will be logged. If not, a spurious error occurred. Timer: 509 MDS header: 0x11 -(00/10 = Grad, 01/11 = RF Cab) MDS opcode: 0x0B EN 351 Thu Aug 24 10:17:59 2006 2225693 1 lx-mr NSP HPC_PORT_ID:spi_mds 503 MDS link failure. An MDS device failed to respond to IPG. If the link is broken, a separate error message will be logged. If not, a spurious error occurred. Timer: 254 MDS header: 0x11 -(00/10 = Grad, 01/11 = RF Cabient) MDS opcode: 0x0B EN 342 Thu Aug 24 10:17:59 2006 2225699 1 lx-mr NSP HPC_PORT_ID:spi_mds 509 MDS link failure. An MDS device failed to respond to IPG on a 2nd try. If the link is broken, a separate error message will be logged. If not, a spurious error occurred. Timer: 509 MDS header: 0x11 -(00/10 = Grad, 01/11 = RF Cab) MDS opcode: 0x0B EN 351 Thu Aug 24 10:18:00 2006 2225693 1 lx-mr NSP HPC_PORT_ID:spi_mds 503 MDS link failure. An MDS device failed to respond to IPG. If the link is broken, a separate error message will be logged. If not, a spurious error occurred. Timer: 254 MDS header: 0x11 -(00/10 = Grad, 01/11 = RF Cabient) MDS opcode: 0x0B EN 342 Thu Aug 24 10:18:00 2006 2225699 1 lx-mr NSP HPC_PORT_ID:spi_mds 509 MDS link failure. An MDS device failed to respond to IPG on a 2nd try. If the link is broken, a separate error message will be logged. If not, a spurious error occurred. Timer: 509 MDS header: 0x11 -(00/10 = Grad, 01/11 = RF Cab) MDS opcode: 0x0B EN 351 Thu Aug 24 10:18:01 2006 2225739 2 lx-mr NSP HPC_PORT_ID:spi_rf_mon 3066 RF Interface (RFI) High Voltage Relay Fault. Possible causes: RF Monitor Cable to System Support Module (SSM) is disconnected or defective. Note: This fault may occur in conjunction with a Power Monitor Fault or when power cycling the SSM.-> EN 352 Thu Aug 24 10:18:02 2006 2225693 1 lx-mr NSP HPC_PORT_ID:spi_mds 503 MDS link failure. An MDS device failed to respond to IPG. If the link is broken, a separate error message will be logged. If not, a spurious error occurred. Timer: 254 MDS header: 0x11 -(00/10 = Grad, 01/11 = RF Cabient) MDS opcode: 0x0B EN 342 Thu Aug 24 10:18:02 2006 2225699 1 lx-mr NSP HPC_PORT_ID:spi_mds 509 MDS link failure. An MDS device failed to respond to IPG on a 2nd try. If the link is broken, a separate error message will be logged. If not, a spurious error occurred. Timer: 509 MDS header: 0x11 -(00/10 = Grad, 01/11 = RF Cab) MDS opcode: 0x0B EN 351 Thu Aug 24 10:18:03 2006 2225693 1 lx-mr NSP HPC_PORT_ID:spi_mds 503 MDS link failure. An MDS device failed to respond to IPG. If the link is broken, a separate error message will be logged. If not, a spurious error occurred. Timer: 254 MDS header: 0x11 -(00/10 = Grad, 01/11 = RF Cabient) MDS opcode: 0x0B EN 342 Thu Aug 24 10:18:03 2006 2225699 1 lx-mr NSP HPC_PORT_ID:spi_mds 509 MDS link failure. An MDS device failed to respond to IPG on a 2nd try. If the link is broken, a separate error message will be logged. If not, a spurious error occurred. Timer: 509 MDS header: 0x11 -(00/10 = Grad, 01/11 = RF Cab) MDS opcode: 0x0B EN 351 Thu Aug 24 10:18:04 2006 2225693 1 lx-mr NSP HPC_PORT_ID:spi_mds 503 MDS link failure. An MDS device failed to respond to IPG. If the link is broken, a separate error message will be logged. If not, a spurious error occurred. Timer: 254 MDS header: 0x11 -(00/10 = Grad, 01/11 = RF Cabient) MDS opcode: 0x0B EN 342 Thu Aug 24 10:18:05 2006 2225699 1 lx-mr NSP HPC_PORT_ID:spi_mds 509 MDS link failure. An MDS device failed to respond to IPG on a 2nd try. If the link is broken, a separate error message will be logged. If not, a spurious error occurred. Timer: 509 MDS header: 0x11 -(00/10 = Grad, 01/11 = RF Cab) MDS opcode: 0x0B EN 351 Thu Aug 24 10:18:06 2006 2225739 2 lx-mr NSP HPC_PORT_ID:spi_rf_mon 3066 RF Interface (RFI) High Voltage Relay Fault. Possible causes: RF Monitor Cable to System Support Module (SSM) is disconnected or defective. Note: This fault may occur in conjunction with a Power Monitor Fault or when power cycling the SSM.-> EN 352 Thu Aug 24 10:18:06 2006 2225693 1 lx-mr NSP HPC_PORT_ID:spi_mds 503 MDS link failure. An MDS device failed to respond to IPG. If the link is broken, a separate error message will be logged. If not, a spurious error occurred. Timer: 254 MDS header: 0x11 -(00/10 = Grad, 01/11 = RF Cabient) MDS opcode: 0x0B EN 342 Thu Aug 24 10:18:06 2006 2225699 1 lx-mr NSP HPC_PORT_ID:spi_mds 509 MDS link failure. An MDS device failed to respond to IPG on a 2nd try. If the link is broken, a separate error message will be logged. If not, a spurious error occurred. Timer: 509 MDS header: 0x11 -(00/10 = Grad, 01/11 = RF Cab) MDS opcode: 0x0B EN 351 Thu Aug 24 10:18:07 2006 2225693 1 lx-mr NSP HPC_PORT_ID:spi_mds 503 MDS link failure. An MDS device failed to respond to IPG. If the link is broken, a separate error message will be logged. If not, a spurious error occurred. Timer: 254 MDS header: 0x11 -(00/10 = Grad, 01/11 = RF Cabient) MDS opcode: 0x0B EN 342 Thu Aug 24 10:18:08 2006 2225699 1 lx-mr NSP HPC_PORT_ID:spi_mds 509 MDS link failure. An MDS device failed to respond to IPG on a 2nd try. If the link is broken, a separate error message will be logged. If not, a spurious error occurred. Timer: 509 MDS header: 0x11 -(00/10 = Grad, 01/11 = RF Cab) MDS opcode: 0x0B EN 351 Thu Aug 24 10:18:09 2006 2225693 1 lx-mr NSP HPC_PORT_ID:spi_mds 503 MDS link failure. An MDS device failed to respond to IPG. If the link is broken, a separate error message will be logged. If not, a spurious error occurred. Timer: 254 MDS header: 0x11 -(00/10 = Grad, 01/11 = RF Cabient) MDS opcode: 0x0B EN 342 Thu Aug 24 10:18:09 2006 2225699 1 lx-mr NSP HPC_PORT_ID:spi_mds 509 MDS link failure. An MDS device failed to respond to IPG on a 2nd try. If the link is broken, a separate error message will be logged. If not, a spurious error occurred. Timer: 509 MDS header: 0x11 -(00/10 = Grad, 01/11 = RF Cab) MDS opcode: 0x0B EN 351 Thu Aug 24 10:18:10 2006 2225739 2 lx-mr NSP HPC_PORT_ID:spi_rf_mon 3066 RF Interface (RFI) High Voltage Relay Fault. Possible causes: RF Monitor Cable to System Support Module (SSM) is disconnected or defective. Note: This fault may occur in conjunction with a Power Monitor Fault or when power cycling the SSM.-> EN 352 Thu Aug 24 10:18:10 2006 2225693 1 lx-mr NSP HPC_PORT_ID:spi_mds 503 MDS link failure. An MDS device failed to respond to IPG. If the link is broken, a separate error message will be logged. If not, a spurious error occurred. Timer: 254 MDS header: 0x11 -(00/10 = Grad, 01/11 = RF Cabient) MDS opcode: 0x0B EN 342 Thu Aug 24 10:18:11 2006 2225699 1 lx-mr NSP HPC_PORT_ID:spi_mds 509 MDS link failure. An MDS device failed to respond to IPG on a 2nd try. If the link is broken, a separate error message will be logged. If not, a spurious error occurred. Timer: 509 MDS header: 0x11 -(00/10 = Grad, 01/11 = RF Cab) MDS opcode: 0x0B EN 351 Thu Aug 24 10:18:12 2006 2225693 1 lx-mr NSP HPC_PORT_ID:spi_mds 503 MDS link failure. An MDS device failed to respond to IPG. If the link is broken, a separate error message will be logged. If not, a spurious error occurred. Timer: 254 MDS header: 0x11 -(00/10 = Grad, 01/11 = RF Cabient) MDS opcode: 0x0B EN 342 Thu Aug 24 10:18:12 2006 2225699 1 lx-mr NSP HPC_PORT_ID:spi_mds 509 MDS link failure. An MDS device failed to respond to IPG on a 2nd try. If the link is broken, a separate error message will be logged. If not, a spurious error occurred. Timer: 508 MDS header: 0x11 -(00/10 = Grad, 01/11 = RF Cab) MDS opcode: 0x0B