GE Healthcare · Nuclear MedicineMillennium
How to recover GenieACQ DAT tape backup using another GenieACQ
Symptom
How to recover GenieACQ DAT tape backup using another GenieACQ Use these instructions when your Genieacqs DAT tape drive is defective, and your only backup is on DAT tape media. These instructions will guide you on using another Geneiacq with a known good DAT tape drive to recover the backup. In general, these instructions work with any other system which has a DAT tape device, for example a PET system.
Applies to
- Models
- Millennium
- Product
- MPR/MPS Millennium MPR Millennium MPS MG/MC/Myosight Millennium MG/MC Millennium MyoSIGHT
- Software
- Genieacq All Genieacq All Genieacq All
- Component
- *Software Software Software
- Area
- Nuclear Medicine
Full cause & step-by-step resolution
The complete cause analysis, the step-by-step remedy for this GE Healthcare Nuclear Medicine issue are available to FSELIB subscribers — re-authored, web-first, searchable.
7-day free trial · no credit card required
Related GE Healthcare Nuclear Medicine issues
- How do I capture and print COR and Camera Uniformity (CUA) result screens on Genieacq, then send to a processing station for ACR
- Collision and E-stop lights are red on the back of the gantry and no movement with Hand Held Controller (HHC) or the genieacq.
- Need part numbers for the Millennium MG/MC table E-Stop
- How do I Delete a file on Genieacq that the system thinks is still acquiring
- VG, the contour works... but in the opposite way.
- MG_MC_MyoSight_MPR_MPS Bar Phantom Resolution Size