GE Healthcare · MRSigna
Clarify 032152 Setting Host Monitor Line Rate Frame and Swap Rate.
Symptom
Setting Host Monitor Line Rate (Frame and Swap Rate). The Default Line Rate, (Frame and Swap Rate) on Signa is 72Hz. This causes Image Quality problems on systems with LCD Host monitors. The Image Quality problem displays itself as subtle ghosting at the transitions of white and black, and at the edges of the image on LCD Monitors only, generating unnecessary system hardware troubleshooting and Customer complaints.
Applies to
- Models
- Signa
- Product
- Signa LX Signa LX Product can be used with 8.x and 9.x systems.
- Software
- 9.0
- Area
- MR
Full cause & step-by-step resolution
The complete cause analysis, the step-by-step remedy for this GE Healthcare MR issue are available to FSELIB subscribers — re-authored, web-first, searchable.
7-day free trial · no credit card required
Related GE Healthcare MR issues
- Running grafidy3, and find there are spikes on the waveforms in the manual prescan display, both windows.
- Fails to Scan with TORSO Coil.
- The Carriage Fails to Advance to Latch to the Table and to Retract When it is Raised, Undocked or Lowered.
- AE title has changed on destination host.
- CWA ID100315. Auto and Manual Prescan Fails.
- What is the Acoustic Noise Level in the Ovation Magnet.