Dell GX200 Entegra will not boot.
Symptom
Dell GX200 Entegra will not boot. Display is blank and the green led on the power switch to monitor flashes. Dell GX200 Entegra will not boot. The BIOS does not appear to boot. Display is blank and the green LED on the power switch to monitor flashes. The drive led cycles on and off. The keyboard caps light does not come on and the as well as the three LEDS on the right side of the keyboard. Dell GX200 Entegra will not boot. The BIOS does not appear to boot. Display is blank and the green LED on the power switch to monitor flashes. The drive LED cycles on and off. The keyboard caps light does not come on and the as well as the three LEDS on the right side of the keyboard.
Applies to
- Models
- Millennium
- Product
- Entegra eNTEGRA Workstation eNTEGRA Workstation
- Software
- Entegra All Entegra all Entegra all
- Component
- *Computer (Tower, PC) *Computer (Tower, PC) *Computer (Tower, PC)
- Area
- Nuclear Medicine
Full cause & step-by-step resolution
The complete cause analysis, the step-by-step remedy for this GE Healthcare Nuclear Medicine issue are available to FSELIB subscribers — re-authored, web-first, searchable.
7-day free trial · no credit card required
Related GE Healthcare Nuclear Medicine issues
- How do I capture and print COR and Camera Uniformity (CUA) result screens on Genieacq, then send to a processing station for ACR
- Collision and E-stop lights are red on the back of the gantry and no movement with Hand Held Controller (HHC) or the genieacq.
- Need part numbers for the Millennium MG/MC table E-Stop
- How do I Delete a file on Genieacq that the system thinks is still acquiring
- VG, the contour works... but in the opposite way.
- MG_MC_MyoSight_MPR_MPS Bar Phantom Resolution Size