GE Healthcare · MRSigna
Unable to print DASM is not recognized.
Unable to print.
Symptom
Unable to print DASM is not recognized. Probe-scsi or scsistat did not see the DASM (device 0), only reported the CD, MOD and hard drive. The command "showdasm" also did not see the DASM and reported "ffffff" for status. The Ready and Transmit LED's on the front of the DASM were always on. If at the "OK" prompt, run probe-scsi or; On LX Systems; cd /export/home/sdc/bin scsistat For Linux Systems; cd /export/home/signa/bin scsistat
Applies to
- Models
- Signa
- Product
- Signa LX Signa LX Product can be used with 8.x and 9.x systems.
- Software
- 9.1 For Signa LX product only
- Area
- MR
Full cause & step-by-step resolution
The complete cause analysis, the step-by-step remedy for this GE Healthcare MR issue are available to FSELIB subscribers — re-authored, web-first, searchable.
7-day free trial · no credit card required
Related GE Healthcare MR issues
- Running grafidy3, and find there are spikes on the waveforms in the manual prescan display, both windows.
- Fails to Scan with TORSO Coil.
- The Carriage Fails to Advance to Latch to the Table and to Retract When it is Raised, Undocked or Lowered.
- AE title has changed on destination host.
- CWA ID100315. Auto and Manual Prescan Fails.
- What is the Acoustic Noise Level in the Ovation Magnet.