GE Healthcare · MR22245894062796
Prescan fails with RFI High voltage relay fault and TG reached the upper limit Due to /w/config/prescan_config.cfg File…
Prescan fails with RFI High voltage relay fault and TG reached the upper limit Due to /w/config/prescan_config.cfg File was Corrupt
Symptom
Auto Prescan Failure
Error message
2224589 TG reached the high limit. See Long Description Suite: MR01 Host: OC0 Proc: MSG_HANDLR0 Error: 2224589 File: PMH.m 1.29 Method: ps_send_ta Line: 50 TG reached the high limit. Check patient positioning and verify the patient is not touching the transmit coil. Try Auto Prescan again or use Manual Prescan. Note: On later systems, this same error code has been slightly reworded to read as follows: Thu Jun 12 11:06:12 2008 Error: 2224589 Host: MENEMR Process: NSP File: TPS:aps_exec Line: 4062796 TG reached the high limit. TG has been set to 190. Check patient positioning and if desired try Auto Prescan again or use Manual Prescan.
Full cause & step-by-step resolution
The complete cause analysis, the step-by-step remedy for this GE Healthcare MR issue are available to FSELIB subscribers — re-authored, web-first, searchable.
7-day free trial · no credit card required
Related GE Healthcare MR issues
- TG Reached the High Limit Due to the 3T RF Body Coil. 3T Excite HDx 14.0 M5.
- 1.5T Extremity Coil (Quad Knee/Foot Coil w/o cable) was causing error 2224589 and grainy images.
- Grainy classic head coil images and sometimes stops scanning due to RF errors.
- RF calibration not in specification.
- CWA ID140754 Auto Prescan Fails with TG Reached the High Limit.
- MRCustomerCall Image Quality OVERRANGE IMAGE ARTIFACT.