GE Healthcare · MRSigna
Clarify #011490 Customer wanted to verify that Fast TG was turned on.
Symptom
How to verify ftg Fast TG is enabled FE may wish to turn off "fast tg" so that autoprescan runs in "APS1" mode, meaning that it sets the transmit gain by starting at TG = 0 and walking up until it finds the proper flip, instead of in "fast TG" mode, where it begins at some predetermined coil-specific higher TG value. Then later, he may wish to turn "fast tg" back on again. How is this done?
Applies to
- Models
- Signa
- Product
- Signa Advantage Includes 4.x and 5.x systems. The software that this solution is tied to is indicated by the Software concept below.
- Software
- 5.X
- Area
- MR
Full cause & step-by-step resolution
The complete cause analysis, the step-by-step remedy for this GE Healthcare MR issue are available to FSELIB subscribers — re-authored, web-first, searchable.
7-day free trial · no credit card required
Related GE Healthcare MR issues
- CWA How to Change Date or Time on LX, Excite, HD, HDe, HDx, HDxT, HFO, Excite HFO, Ovation1-4, Profile1-5, Discovery MR450 MR750 and Optima 450w Systems.
- CWA No Power to the Table and Magnet Display, Table Will Not Move And No Lights On the Magnet.
- CWA How to Change Exam Number from Remote Tools.
- Known Software issue with 15M4B coding error.
- Unable to Send Images to the PACS Due to PACS is down.
- U41 of the Slave RF Ctrl Assy, part of the PSU in the SRFD2 RF Amplifier Failed.