Service Note 43396_0 Jan/03 eNTEGRA 2.5 M3 Software Release
Symptom
Service Note 43396_0 Jan/03 eNTEGRA 2.5 M3 Software Release --Upgrade Prerequisites: eNTEGRA 2.0318 or 2.0319 or 2.5057 or 2.5060. Service Note 43396_0 Jan/03 eNTEGRA 2.5 M3 Software Release -- Upgrade Prerequisites: eNTEGRA 2.0318 or 2.0319 or 2.5057 or 2.5060. Important For XPert users of system 5.5 only, please note that during the eNTEGRA 2.5 upgrade, the XPert Patch, included on the eNTEGRA 2.5 Software CD (M3), must be installed on all XPert systems with version 5.5, to enable transfer of clinical data to/from eNTEGRA. The patch upgrade is documented in the eNTEGRA 2.5 Upgrade Instructions ITF document (ITF000114) Section 4.14 – Upgrading XPert Systems to Enable Data Transfer to/from eNTEGRA V2.,5, and in the eNTEGRA 2.5 Service Manual (2354979-100) Section A.1 Upgrading the XPert Patch, both included in the Software package. No Updates
Applies to
- Product
- Entegra eNTEGRA Workstation eNTEGRA Workstation
- Software
- Entegra 2.5202 Software Revision: 2.5202 M4 release Kit Part Number: UGP001440 FMI # / Service Note #: FMI 40770 Mandatory on Request Comments: LSW000419 Software CD PKG Prerequisite: 2.0318 or 2.0319
- Area
- Nuclear Medicine
Full cause & step-by-step resolution
The complete cause analysis, the step-by-step remedy for this GE Healthcare Nuclear Medicine issue are available to FSELIB subscribers — re-authored, web-first, searchable.
7-day free trial · no credit card required
Related GE Healthcare Nuclear Medicine issues
- Muga patch FMI 40788 when loaded does not indicate it completed
- How do I capture and print COR and Camera Uniformity (CUA) result screens on Genieacq, then send to a processing station for ACR
- Part number needed for Optima E-Stop
- Collision and E-stop lights are red on the back of the gantry and no movement with Hand Held Controller (HHC) or the genieacq.
- Service Note 43783_1 Feb/08 Infinia/Ventri/Xeleris 1.1 & 2
- Need part numbers for the Millennium MG/MC table E-Stop