FMI 40790_1 Preventive Tightening of Vg Lock Screws and Collimator Cart Front Wheels
Symptom
FMI 40790_1 Preventive Tightening of Vg Lock Screws and Collimator Cart Front Wheels FMI 40790 _1 Preventive Tightening of Vg Lock Screws and Collimator Cart Front Wheels - Updates and Corrections 1. The screws, mounting VG Lock assembly to the ring of the gantry were not tightened properly. Loose screws in this location might cause the VG Lock to become disconnected from the bearing ring and allow free movement of the Detector #2 in a downward direction until collision with Detector #1. 2. One of the screws fastening the front wheel of the Collimator Cart to its axle, fell off. This could cause the cart to fall, particularly when it is loaded with heavy collimators. No Updates
Applies to
- Models
- Millennium
- Product
- MG/MC/Myosight Millennium MG/MC Millennium MyoSIGHT
- Component
- *Gantry Gantry Gantry
- Area
- Nuclear Medicine
Full cause & step-by-step resolution
The complete cause analysis, the step-by-step remedy for this GE Healthcare Nuclear Medicine issue are available to FSELIB subscribers — re-authored, web-first, searchable.
7-day free trial · no credit card required
Related GE Healthcare Nuclear Medicine issues
- How do I capture and print COR and Camera Uniformity (CUA) result screens on Genieacq, then send to a processing station for ACR
- Collision and E-stop lights are red on the back of the gantry and no movement with Hand Held Controller (HHC) or the genieacq.
- Need part numbers for the Millennium MG/MC table E-Stop
- How do I Delete a file on Genieacq that the system thinks is still acquiring
- VG, the contour works... but in the opposite way.
- MG_MC_MyoSight_MPR_MPS Bar Phantom Resolution Size