GE Healthcare · MRSigna
Information on ACGD Cabinet Air Flow for proper SGA Operation.
Symptom
Information on ACGD Cabinet Air Flow for proper SGA Operation. ACGD gradient amplifiers require a minimum amount of air flow to protect the power electronics from overheating.We have found situations where the fan becomes misaligned relative to the inlet ring during shipping. Furthermore, we have found that at some sites, the cabinet configuration is out of spec (missing panels, open doors, etc.). This SMILe provides a checklist to make sure that the cabinet airflow is in spec. (SMILe Nov. 10, 2005)
Applies to
- Models
- Signa
- Product
- Signa LX Signa LX Product can be used with 8.x and 9.x systems.
- Software
- 9.1 For Signa LX product only
- Area
- MR
Full cause & step-by-step resolution
The complete cause analysis, the step-by-step remedy for this GE Healthcare MR issue are available to FSELIB subscribers — re-authored, web-first, searchable.
7-day free trial · no credit card required
Related GE Healthcare MR issues
- Running grafidy3, and find there are spikes on the waveforms in the manual prescan display, both windows.
- Fails to Scan with TORSO Coil.
- The Carriage Fails to Advance to Latch to the Table and to Retract When it is Raised, Undocked or Lowered.
- AE title has changed on destination host.
- CWA ID100315. Auto and Manual Prescan Fails.
- What is the Acoustic Noise Level in the Ovation Magnet.