EDI board Part Number UGP001582 is with M3 (R4.5 V010) FPGA version 0018 will still remained in stock to support the M3…
EDI board Part Number UGP001582 is with M3 (R4.5 V010) FPGA version 0018 will still remained in stock to support the M3 system in the field.
Symptom
EDI board Part Number UGP001582 is with M3 (R4.5 V010) FPGA version 0018 will still remained in stock to support the M3 system in the field. UGP001582 can be used for the M4 (R4.5 V014) system's only by upgrading the EDI board new patch UGP500261 "GA450- EDI board Part Number UGP001582 is with M3 (R4.5 V010) FPGA version 0018 will still remained in stock to support the M3 system in the field. UGP001582 can be used for the M4 (R4.5 V014) system's only by upgrading the EDI board new patch UGP500261 "GA450-05-0: M4 (R4.5 V014) FPGA fix for aui freeze" which is required to flash the EDI board firmware (FPGA version 101). EDI board Part Number UGP001582 is with M3 (R4.5 V010) FPGA version 0018 will still remained in stock to support the M3 system in the field. UGP001582 can be used for the M4 (R4.5 V014) system's only by upgrading the EDI board new patch UGP500261 "GA450-05-0: M4 (R4.5 V014) FPGA fix for aui freeze" which is required to flash the EDI board firmware (FPGA version 101). Contributor 212004179 Brown December 02 2005
Applies to
- Models
- Millennium
- Product
- MG/MC/Myosight Millennium MG/MC Millennium MyoSIGHT
- Software
- GenieAcq R4.5 V14 (M4) Genieacq 4.5 Build 14 (M4) 5220379 Genieacq SW R4.5 V014 M4 with accumulative patches GA450-05-1, GA450-6-1, GA450-07-0, GA450-08-1, and GA450-09-0 for Spare Part GENIE Acq R 4.5 V014 supports EDI and I/N board hardware configurations. The following computer platforms are supported by this version: SuperMicro P4SBR ( only supports the EDI detctor, reference SN43628 ) IBM x205 Dell 1400SC Dell GX200 Dell 1300. Dell 2200 and Intel AltServer are not supported. Reference CIS 5150522-100_r2
- Component
- *Detector (Imaging Detector) *Detector (Imaging Detector) *Detector (Imaging Detector)
- Area
- Nuclear Medicine
Full cause & step-by-step resolution
The complete cause analysis, the step-by-step remedy and the attached service documents for this GE Healthcare Nuclear Medicine issue are available to FSELIB subscribers — re-authored, web-first, searchable.
7-day free trial · no credit card required
Related GE Healthcare Nuclear Medicine issues
- How do I capture and print COR and Camera Uniformity (CUA) result screens on Genieacq, then send to a processing station for ACR
- Collision and E-stop lights are red on the back of the gantry and no movement with Hand Held Controller (HHC) or the genieacq.
- Need part numbers for the Millennium MG/MC table E-Stop
- How do I Delete a file on Genieacq that the system thinks is still acquiring
- VG, the contour works... but in the opposite way.
- MG_MC_MyoSight_MPR_MPS Bar Phantom Resolution Size