Need part number for MG Gantry Internal Handset and E-stop cable connector from IPS.
Symptom
Need part number for MG Gantry Internal Handset and E-stop cable connector from IPS. GANTRY WIRING for E-STOPS/HANDSET JACKS Need part number for MG Gantry Internal Handset and E-stop connector cable from IPS. Cable connects from G1 or G4 of IPS and routes internally to base of Gantry for connection to Handset and E-stop 1 or 2 connection. GANTRY WIRING for E-STOPS/HANDSET JACKS Need part number for Gantry Internal Handset and E-stop connector cable from IPS. Cable connects from G1 or G4 of IPS and routes internally to base of Gantry for connection to Handset and E-stop 1 or 2 connection. Contributor 212004014 Merritt November 07 2005
Applies to
- Models
- Millennium
- Product
- MG/MC/Myosight Millennium MG/MC Millennium MyoSIGHT
- Component
- *Gantry Gantry Gantry
- Area
- Nuclear Medicine
Full cause & step-by-step resolution
The complete cause analysis, the step-by-step remedy for this GE Healthcare Nuclear Medicine issue are available to FSELIB subscribers — re-authored, web-first, searchable.
7-day free trial · no credit card required
Related GE Healthcare Nuclear Medicine issues
- How do I capture and print COR and Camera Uniformity (CUA) result screens on Genieacq, then send to a processing station for ACR
- Collision and E-stop lights are red on the back of the gantry and no movement with Hand Held Controller (HHC) or the genieacq.
- Need part numbers for the Millennium MG/MC table E-Stop
- How do I Delete a file on Genieacq that the system thinks is still acquiring
- VG, the contour works... but in the opposite way.
- MG_MC_MyoSight_MPR_MPS Bar Phantom Resolution Size