GE Healthcare · MRSigna22257622225761
can't scan due to RF amp' peak power faults.
Symptom
Will Not Scan With RF Errors Will not scan with RF errors
Error message
2225762 - Analogic RF Amplifier 2 Average Power Fault. Error: 2225762 Host: lx_mr Process: NSP File: HPC_PORT_ID:spi_rf_mon Line: 3066 Analogic RF Amplifier 2 Average Power Fault. Analogic RF Amplifier 2 reports its average power has exceeded 1000W. Possible causes: the PSD exceeds system limits, defective RF Interface (RFI) output stage, or defective RF Amplifier 2. 2225761 - Analogic RF Amplifier 2 Peak Power Fault. Error: 2225761 Host: lx_mr Process: NSP File: HPC_PORT_ID:spi_rf_mon Line: 3066 Analogic RF Amplifier 2 Peak Power Fault. Peak power from Analogic RF Amplifier 2 exceeds specification(69.5-69 .8dbm). Possible causes: RF Interface (RFI) calibration, defective RFI output stage, defective Exciter or defective RF Amplifier 2.
Applies to
- Models
- Signa
- Product
- Signa LX Signa LX Product can be used with 8.x and 9.x systems.
- Software
- 9.1 For Signa LX product only
- Area
- MR
Full cause & step-by-step resolution
The complete cause analysis, the step-by-step remedy for this GE Healthcare MR issue are available to FSELIB subscribers — re-authored, web-first, searchable.
7-day free trial · no credit card required
Related GE Healthcare MR issues
- Running grafidy3, and find there are spikes on the waveforms in the manual prescan display, both windows.
- Fails to Scan with TORSO Coil.
- The Carriage Fails to Advance to Latch to the Table and to Retract When it is Raised, Undocked or Lowered.
- AE title has changed on destination host.
- CWA ID100315. Auto and Manual Prescan Fails.
- What is the Acoustic Noise Level in the Ovation Magnet.