Dark Vertical Bands in Images Due to X axis PPBM
Symptom
MRIQ: Dark Vertical Bands or Venetian Blind Artifact in Images See attached file. The system is a 1.5T HiSpeed, with SGD Gradients, running 9.1 M4 software. These artifacts were pretty repeatable. The problem appeared to only occur on the Knee scans and some scans done with the TORSO coil. The Customer would see an artifact just about every other patient scan. There were intermittent errors in the log stating X axis overload and PPBM errors. See attached file. The system is a 1.5T HiSpeed, with SGD Gradients, running 9.1 M4 software. These artifacts were pretty repeatable. The problem appeared to only occur on the Knee scans and some scans done with the TORSO coil. The Customer would see an artifact just about every other patient scan. There were intermittent errors in the log stating X axis overload and PPBM errors.
Applies to
- Models
- Signa, HiSpeed
- Product
- Signa LX Signa LX Product can be used with 8.x and 9.x systems.
- Software
- 9.1 For Signa LX product only
- Component
- 2175599-2 SGD Hi Slew GPM PPBM module
- Area
- MR
Full cause & step-by-step resolution
The complete cause analysis, the step-by-step remedy and the attached service documents for this GE Healthcare MR issue are available to FSELIB subscribers — re-authored, web-first, searchable.
7-day free trial · no credit card required
Related GE Healthcare MR issues
- Running grafidy3, and find there are spikes on the waveforms in the manual prescan display, both windows.
- Fails to Scan with TORSO Coil.
- The Carriage Fails to Advance to Latch to the Table and to Retract When it is Raised, Undocked or Lowered.
- AE title has changed on destination host.
- CWA ID100315. Auto and Manual Prescan Fails.
- What is the Acoustic Noise Level in the Ovation Magnet.