Intermittent Ghosting or Smearing on Head FSE scans
Symptom
MRIQ Intermittent Ghosting or Smearing on Head FSE scans The system is a 5.X Horizon Echospeed, running 5.8 software. The Customer experiences intermittent ghosting on Head FSE scans only. All other scans do not have an issue. See image and Additional details in the Long Description. The system is a 1.5T 5.X EchoSpeed with an SIII magnet. The scan above is a FSE scan in the HEAD coil. This was very reproducible to varying degrees of ghosting, only on Head FSE scans. This same sequence was done in the BODY coil and with the CTL coil and was not a problem. Other PSD’s in the HEAD coil are not a problem. Along with the problem described with the images, SPT would also fail FSE stability with HEAD only, BODY FSE Stability passed without any problem. FGRE Stability passed on both Head and BODY.
Applies to
- Models
- Signa
- Product
- Signa Horizon (5X Horizon) 5X Horizon systems
- Software
- 5.X
- Area
- MR
Full cause & step-by-step resolution
The complete cause analysis, the step-by-step remedy for this GE Healthcare MR issue are available to FSELIB subscribers — re-authored, web-first, searchable.
7-day free trial · no credit card required
Related GE Healthcare MR issues
- Running grafidy3, and find there are spikes on the waveforms in the manual prescan display, both windows.
- Fails to Scan with TORSO Coil.
- The Carriage Fails to Advance to Latch to the Table and to Retract When it is Raised, Undocked or Lowered.
- AE title has changed on destination host.
- CWA ID100315. Auto and Manual Prescan Fails.
- What is the Acoustic Noise Level in the Ovation Magnet.