Clarify Ghosting Artifacts on Head Scans.
Symptom
MRIQ Troubleshooting Ghosting Artifacts on Head Scans Link to image quality troubleshooting guide. System has ghosting artifacts on head scans. SPT shows severe Head instability in Magnitude and Phase. Running RFT shows severe magnitude and phase instability in Head Sense loop test, but passes at the Head T/R switch output (head quick disconnect blue connector). FE replaced the Head coil and cables but still has same symptoms. Image Library System has ghosting artifacts on head scans. SPT shows severe Head instability in Magnitude and Phase. Running RFT shows severe magnitude and phase instability in Head Sense loop test, but passes at the Head T/R switch output (head quick disconnect blue connector). FE replaced the Head coil and cables but still has same symptoms.
Applies to
- Models
- Signa
- Product
- Signa LX Signa LX Product can be used with 8.x and 9.x systems.
- Software
- 9.1 For Signa LX product only
- Area
- MR
Full cause & step-by-step resolution
The complete cause analysis, the step-by-step remedy for this GE Healthcare MR issue are available to FSELIB subscribers — re-authored, web-first, searchable.
7-day free trial · no credit card required
Related GE Healthcare MR issues
- Running grafidy3, and find there are spikes on the waveforms in the manual prescan display, both windows.
- Fails to Scan with TORSO Coil.
- The Carriage Fails to Advance to Latch to the Table and to Retract When it is Raised, Undocked or Lowered.
- AE title has changed on destination host.
- CWA ID100315. Auto and Manual Prescan Fails.
- What is the Acoustic Noise Level in the Ovation Magnet.