GE Healthcare · MRSigna22446452244597
LX Communication problem between GP and GSC.
Symptom
MRIQ Scan stops Multiple Times, They Restart the Scan and it Completes but Images Have Severe Zipper Artifacts. http://3.87.118.28/optec3/common/8xdocs/epst/mod11/m11_010_000.html Link to image quality troubleshooting guide. Scan stops in the middle of gradient stressing (GRE) sequences. After the gradients recovered, the scan completes (eventually after several stops). The images get zippers and artifacts due to the stops.
Error message
2244645 - The GSC Stopped Responding to the Gradient Processor (GP). Thu Dec 11 09:31:21 2003 2244645 2 MR-OC0 NSP SCP:GP 471 The GSC stopped responding to the Gradient Processor (GP). Verify that the GSC is powered up and the serial communication cable is attached. If this does not work, try cycling GSC power. 2244597 - Gradients recovered successfully on all 3 axis. There are no Faults at the Present Time. Thu Dec 11 09:31:26 2003 2244597 2 MR-OC0 NSP SCP:GP 1069 The gradient system on the Z axis recovered successfully. There are no faults at the present time.
Applies to
- Models
- Signa
- Product
- Signa LX Signa LX Product can be used with 8.x and 9.x systems.
- Software
- 9.0
- Area
- MR
Full cause & step-by-step resolution
The complete cause analysis, the step-by-step remedy for this GE Healthcare MR issue are available to FSELIB subscribers — re-authored, web-first, searchable.
7-day free trial · no credit card required
Related GE Healthcare MR issues
- Running grafidy3, and find there are spikes on the waveforms in the manual prescan display, both windows.
- Fails to Scan with TORSO Coil.
- The Carriage Fails to Advance to Latch to the Table and to Retract When it is Raised, Undocked or Lowered.
- AE title has changed on destination host.
- CWA ID100315. Auto and Manual Prescan Fails.
- What is the Acoustic Noise Level in the Ovation Magnet.