MRIQ Shear Distortion Oval Images on DWI Diffusion Weighted Images.
Clarify 025959 LX 9.1.
Symptom
MRIQ Shear Distortion Oval Images on DWI Diffusion Weighted Images. See long description. Some of the diffusion-weighted epi images are reconstructed as ovals tipped at a -45 degree angle. This is a 1.5T Hi-Speed LX system. All EPT cals pass. SPT passes. No other imaging mode has this effect. A System Health check shows no problem with the system configuration or calibrations. All REQUIRED (but not all) eddy curent crossterms are applied. If at the OnLine Center, you may view a phantom image of this problem: system ID 610973MR, Exam 50173, Series 1, Image 121. Normal phantom images are: same exam, same series, images 69 and 101. Note that the oval phantom image looks exactly like the example shown in Service Note 65043 "Diffusion Weighted Image Artifacts" page 4 "Shear Distortion due to eddy currents on logical read x diffusion", second image from the right.
Applies to
- Models
- Signa
- Product
- Signa LX Signa LX Product can be used with 8.x and 9.x systems.
- Software
- 9.1 For Signa LX product only
- Area
- MR
Full cause & step-by-step resolution
The complete cause analysis, the step-by-step remedy for this GE Healthcare MR issue are available to FSELIB subscribers — re-authored, web-first, searchable.
7-day free trial · no credit card required
Related GE Healthcare MR issues
- Running grafidy3, and find there are spikes on the waveforms in the manual prescan display, both windows.
- Fails to Scan with TORSO Coil.
- The Carriage Fails to Advance to Latch to the Table and to Retract When it is Raised, Undocked or Lowered.
- AE title has changed on destination host.
- CWA ID100315. Auto and Manual Prescan Fails.
- What is the Acoustic Noise Level in the Ovation Magnet.