GE Healthcare · X-ray R&FBrivoOptima830106683010678301068830106983010708301058
Battery over temperature, Unit stops charging, Exposure inhibited
Symptom
Battery Failures: Battery over temperature, Unit stops charging, Exposure inhibited The system reports a battery over temperature. System may stop charging. System may inhibit X-Ray generation. This applies to the Optima XR220amx, Optima XR200amx, and Brivo XR285amx systems.
Error message
8301066, 8301067, 8301068, 8301069, 8301070, 8301058, 8301059, 8301060, 8301061, 8301078 SEE LONG DESCRIPTION FOR MORE INFORMATION Error Codes General Description 8301066 Battery pack 1 voltage over 48V. Charge Inhibited 8301067 Battery pack 2 voltage over 48V. Charge Inhibited 8301068 Battery pack 3 voltage over 48V. Charge Inhibited 8301069 Battery pack 4 voltage over 48V. Charge Inhibited 8301070 Battery Stack voltage over 180V. Charge Inhibited 8301058 Battery pack 1 temperature over 55C. Charge Inhibited 8301059 Battery pack 2 temperature over 55C. Charge Inhibited 8301060 Battery pack 3 temperature over 55C. Charge Inhibited 8301061 Battery pack 4 temperature over 55C. Charge Inhibited 8301078 Average battery temperature over 55C
Applies to
- Models
- Brivo, Optima
- Product
- Brivo XR285amx Optima XR220amx Optima XR200amx
- Software
- All
- Component
- Main system battery packs.
- Area
- X-ray R&F
Full cause & step-by-step resolution
The complete cause analysis, the step-by-step remedy and the attached service documents for this GE Healthcare X-ray R&F issue are available to FSELIB subscribers — re-authored, web-first, searchable.
7-day free trial · no credit card required
Related GE Healthcare X-ray R&F issues
- Collimator light does not work from the RCIM2 even though the button is present
- Discovery XR650 or Optima XR640
- No procedure to copy IP looks from a Definium 8000 system to a Discovery XR650 or Optima 640 system
- When the ./xrdinstall.om script is run to install the Operator Manual and a specific language is selected (English, for example), nothing happens.
- Next button in the lower right corner of the 2nd page of the Edit View window is grayed out.
- Grid (any focal length) insertion is not recognized by the wallstand.