GE Healthcare · MRSigna2254250

2254250 MKS error code 35, 50V Power Supply Low Due to 3T MKS 35 Kw RF Amp.

Symptom

Unable to Scan with 3T MKS RF Amplifier will Not go Ready MKS amp powers up but will not come ready.

Error message

2254250 - 3T RF Amplifier 50 Volt Supply Low (fault 35). The SSD 50 Volt supply was below 5% specification. See Long Description for extended error message. 2254250 3T RF Amplifier 50 Volt Supply Low (fault 35). The SSD 50 Volt supply was below 5% specification. Possible Causes: Defective supply or short on supply output. If the fault persists, replace the RF amplifier. Extended Error: The RF Amp 50 V Power Supply has low voltage. Check fuses F15, F16 and F17, replace if necessary. If the fuses are functional, replace the power supply deck.

Applies to

Models
Signa
Product
3.0T Signa HDxT Apps For use with HD16.0_VO1 and HD16.0_VO2 version software only. For use with HD16.0_VO1 and HD16.0_VO2 version software only.
Software
HD16 Includes HD16.0_VO1 and HD16.0_VO2 version software and applies to 1.5T and 3.0T "Signa HDxT Apps" systems only. Includes HD16.0_VO1 and HD16.0_VO2 version software and applies to 1.5T and 3.0T "Signa HDxT Apps" systems only.
Component
SecondOpinion MKS 3T 35kW RF Amp 5104896 See comments in resolution concept for second opinion requirements before ordering this part.
Area
MR

Full cause & step-by-step resolution

The complete cause analysis, the step-by-step remedy for this GE Healthcare MR issue are available to FSELIB subscribers — re-authored, web-first, searchable.

Start free trialSign in

7-day free trial · no credit card required

Related GE Healthcare MR issues