GE Healthcare · MRSigna224506730000
GP Errors During DC Offset Calibration Due To GP3.
Symptom
GP Errors during DC Offset Calibration on System Boot and TPS Reset See Long Description
Error message
2245067 GP ASM ADC(%) Calibration Out of Range See Long Description for extended error message. 2245067 GP ASM ADC%c calibration out of range. Measured Calibration Factors are %d mV and %d mV, Nominal Calibration Factors are 30000 mV and 0 mV. Please perform a TPS reset and try again. Extended Error : If the problem persists, replace the GP.
Applies to
- Models
- Signa
- Product
- Signa HDxT This product is for 1.5T Signa HDxT systems with 15.0 software and HDi systems with 15.0 software. This product is for 1.5T Signa HDxT systems with 15.0 software and HDi systems with 15.0 software.
- Software
- 15.0 For Product Signa HDxT and HDi only. -- NOT to be used with HDe. -- For Product Signa HDxT and HDi only. -- NOT to be used with HDe. --
- Component
- 2331400-2 Gradient Processor GP3
- Area
- MR
Full cause & step-by-step resolution
The complete cause analysis, the step-by-step remedy for this GE Healthcare MR issue are available to FSELIB subscribers — re-authored, web-first, searchable.
7-day free trial · no credit card required
Related GE Healthcare MR issues
- Running grafidy3, and find there are spikes on the waveforms in the manual prescan display, both windows.
- Fails to Scan with TORSO Coil.
- The Carriage Fails to Advance to Latch to the Table and to Retract When it is Raised, Undocked or Lowered.
- AE title has changed on destination host.
- CWA ID100315. Auto and Manual Prescan Fails.
- What is the Acoustic Noise Level in the Ovation Magnet.