GE Healthcare · MRSigna222466622448492244871
Defective HFA - High Fidelity Amplifier.
Symptom
Will Not Scan with Gradient Errors.
Error message
2224666 Auto Prescan failed, Master Gradient is not ready 2244849 The GP is reporting a Gradient Amplifier Y Axis OverVoltage Fault See Long Description Extended Error : If this fault is intermittent, first rule out PSD-related problems by changing the FOV or oblique angle. If faults continue to occur, and if there is no Overvoltage fault reported on the SGA Power Supply, then replace the Gradient Amplifier. 2244871 The GP reported multiple Gradient Amplifier % Axis OverVoltage Faults. See Long Description Extended Error : If an Overvoltage fault is not also reported on the SGA Power Supply, replace the Gradient Amplifier. Else replace the SGA Power Supply. TPS reset is required to recover from this fault.
Applies to
- Models
- Signa
- Product
- Signa HDxT This product is for 1.5T Signa HDxT systems with 15.0 software and HDi systems with 15.0 software. This product is for 1.5T Signa HDxT systems with 15.0 software and HDi systems with 15.0 software.
- Software
- 15.0 For Product Signa HDxT and HDi only. -- NOT to be used with HDe. -- For Product Signa HDxT and HDi only. -- NOT to be used with HDe. --
- Component
- 5189221-3 HFA-S Assembly with spacer to prevent cable swap and FRU Packaging 5189221-3 HFA-S Assembly with spacer to prevent cable swap and FRU Packaging
- Area
- MR
Full cause & step-by-step resolution
The complete cause analysis, the step-by-step remedy for this GE Healthcare MR issue are available to FSELIB subscribers — re-authored, web-first, searchable.
7-day free trial · no credit card required
Related GE Healthcare MR issues
- Running grafidy3, and find there are spikes on the waveforms in the manual prescan display, both windows.
- Fails to Scan with TORSO Coil.
- The Carriage Fails to Advance to Latch to the Table and to Retract When it is Raised, Undocked or Lowered.
- AE title has changed on destination host.
- CWA ID100315. Auto and Manual Prescan Fails.
- What is the Acoustic Noise Level in the Ovation Magnet.