GE Healthcare · Nuclear MedicineMillennium
Millennium MG Gantry only have Rotation motion, all other motions fail to move with handset or initialize.
Symptom
Millennium MG Gantry only have Rotation motion, all other motions fail to move with handset or initialize. Millennium MG Gantry only has Rotation motion, all other motions fail to move with handset or initialize. Can move rotation motion ok but all others (detector radial one and two, table vertical, lateral and longitudinal), all fail to move, do hear relays click when activate the axis and the drive amp led for that axis turns on but goes right back off.
Applies to
- Models
- Millennium
- Product
- MG/MC/Myosight Millennium MG/MC Millennium MyoSIGHT
- Component
- PCA000416 MG/MC/Myosight IPS Power supply PCA000416 MG/MC/Myosight IPS Power supply Alternately, both new PCA000416 plus cable adapter CBL000948 can be ordered using part number UGP001275 PCA000416 MG/MC/Myosight IPS Power supply Alternately, both new PCA000416 plus cable adapter CBL000948 can be ordered using part number UGP001275 *IPS IPS IPS
- Area
- Nuclear Medicine
Full cause & step-by-step resolution
The complete cause analysis, the step-by-step remedy for this GE Healthcare Nuclear Medicine issue are available to FSELIB subscribers — re-authored, web-first, searchable.
7-day free trial · no credit card required
Related GE Healthcare Nuclear Medicine issues
- How do I capture and print COR and Camera Uniformity (CUA) result screens on Genieacq, then send to a processing station for ACR
- Collision and E-stop lights are red on the back of the gantry and no movement with Hand Held Controller (HHC) or the genieacq.
- Need part numbers for the Millennium MG/MC table E-Stop
- How do I Delete a file on Genieacq that the system thinks is still acquiring
- VG, the contour works... but in the opposite way.
- MG_MC_MyoSight_MPR_MPS Bar Phantom Resolution Size