CT/e, CT Prospeed AI/FI Irix or Linux

Symptom

Applies to

Models

VCT

Product

CT/e, CT Prospeed AI/FI Irix or Linux See long description for sale information Product Name: CT/e Single CT Scanner: Irix Platform A list of types. (a Product/hardware table) N/A An On-site / Remote identification aid . (Example: check_config) N/A A Table of options (included, optional, new introductions, …) N/A A list of Software that has run on this product (Product / Software Compatibility Table) 3.01 / 3.02 / 3.03 Linux CTe Product photographs N/A Marketing Information N/A Documents: Always use the most appropriate documentation for your system. Documentation can be found on CT Service CDROM/DVD, or online at FCT Service Engineering Tech Pubs Website, Common Document Library, and My Workshop. Links to the updated Product Service Manuals, FMIs, Service Notes, Option Manuals and Operator Documents can be found in the attachment Always use the most appropriate documentation for your system.

Component

2369082-2 IA HOST COMPUTER used on BE1 See Long Description for part details 2369082-2 Host PC 845 used on BE1 Part #: 2369082-2 Part Type: GP CONSUMABLES Part Weight: 0.99 KGM Repairable: No Returnable: No Hazardous Material: N Description: IA HOST COMPUTER FRU: Yes Status: Orderable Comments: ** FE ASSIST ** If no stock of 2369082-2 The part is obsolete, please order 5150475 for CT/e Be1 system, or 5150479 for CT/e Dual system.(212001261 5/7/08) Refer to Component Replacement manual which can found at hungwei Tech pubs website at http://cnbeiapp06.asia.med.ge.com/bjtp/index.htm Alway use the most appropriate documentation for your system The folowing was from direction 2326233 rev 11,and is provided for reference Host Computer Assy (For PC 845) 1. Saving System State Data by referring to Functional Check/Adjustment (CD-ROM) -> Introduction -> 3-4 Basic Operation. 2. Shut down system. 3. Turn OFF the OC main power. 4. Remove the front and right covers from the OC. 5. Turn off the CB1 and CB2 at right side of the OC. 6. Remove the six (6) screws that fasten the SCSI Bay (see Illustration 4-1). 7. Remove the OC Host PC Front Cover by unscrewing its four (4) screws (Illustration 4-1). Illustration 4-1 OC Host Cover 8. Remove the two (2) screws that fasten the Host PC Support (Illustration 4-1). 9. Move forward the Peripheral Assy and the OC Host Computer Assy to a position which is convenient to disconnect the related cables (Illustration 4-3). 10. Mark and disconnect the cable connectors. Note There are two types of Host Computer: 2369082-2 and 2369082-3. The connectors are different between the two types of Host Computer. For Host PC (2369082-2) a. Disconnect the connectors on the rear panel of computer (Host Video, Ethernet, Serial 1, Serial 2, Keyboard, Mouse, Power Supply Cable, Bit3 Cable). b. Disconnect the IDE cable connectors from CD-ROM Drive and two Hard Disk Drives, two Power cable connectors from Hard Disk Drives Disconnect the Outside Sense cable and the Outside Control cable from CN4 and CN2 of the Front Panel. For Host PC (2369082-3) a. Disconnect the connectors on the rear panel of computer (Host Video, Bit3 Cable, Ethernet, Serial 1, Serial 2, Keyboard, Mouse, Power Supply Cable, Outside Control cable). b. Disconnect the IDE cable connectors from CD-ROM Drive and two Hard Disk Drives. Note For the replacement between Host Computer 2369082-2 and 2369082-3, refer to section 4-1-4. 11. Slide the Host Computer and the Host PC Support out, ensure that no cables and connectors obstruct the Host Computer Assy removal (Illustration 4-3). 12. Unscrew the 4 screws and loosen the 2 straps that fix the Host Computer Assy (Illustration 4-2). 13. Remove the Host Computer Assy from the Host PC Support. Illustration 4-2 Host Computer Assy (Front View) Screws (x4) Host Computer ASSY Straps (x2) 14. Install the new Host Computer Assy by referring to steps 13. through 8. 15. Check BIOS setting. Power ON the OC, press Meas Dist to reach BIOS set screen when the Pentium Logo displayed on the screen. Refer to Advanced Diagnostics -> OC -> HOST COMPUTER BIOS STANDARD SETTING. 16. Softeware installation: Refer to CD-ROM, Functional Check/Adjustment -> System -> Software Loading to reinstall Software. 17. Restore the OC to original configuration. 18. Perform the test scan and verify that the scanned image shows normally. end

Area

CT

Related GE Healthcare CT issues

• LightSpeed 4.X - GRE
• Phantom Holder is bent, broken, cracked, or damaged
• LightSpeed 3.X (Ultra, Plus, QX/i) - GOC2
• LightSpeed 5.X (60kW)
• LightSpeed 5.X (60kW)
• Keyboard is not typing the characters correctly