LightSpeed 7.x (VCT, VCT Select, Pro32)
Symptom
Whenever a scan protocol is selected to edit or scan with, the system displays an error message that says: 'Cannot read selected protocol, please select a different protocol.' See long description for more information. Whenever a scan protocol is selected to edit or scan with, the system displays an error message that says: 'Cannot read selected protocol, please select a different protocol.' In one case, this was seen to happen with one particular scan protocol just after the customer had edited some value in that particular scan protocol.
Error message
Error: 200109090 Protocol file /usr/g/protocols/scanRx/abdomen 1.proto: expected '=', got 'LD""' See long description for a sample error message. Wed May 12 08:47:40 2010 Error: 200109090 Host: psct1adv Process: scanRx File: ConvertProtocol.cxx Line: 384 Protocol file /usr/g/protocols/scanRx/abdomen 1.proto: expected '=', got 'LD""'
Applies to
- Models
- LightSpeed, VCT
- Product
- LightSpeed 7.x (VCT, VCT Select, Pro32) V40_H_V64_G_GTM V40_H_V64_G_GTL V40_H_V32_G_GTM V40_H_V32_G_GTL V40_H_H64_G_GTM V40_H_H64_G_GTL V40_H_HS64_G_G Product Name: LightSpeed 7.x (VCT, VCT Select, Pro32) Product photographs Method of remote or software identification - See attachment for a complete list of software commands and typical results. check_config swhwinfo “swhwinfo” will have the following new switches available with the VCT M4 and PF 1.5 M3 software release (software release deploying this “swhwinfo” capability is “06MW03.?”): · -c or -classc = Outputs the Class C version, if installed, on the system · -m or -classm = Outputs the Class M version, if installed, on the system · -o or -os = Outputs the Operating System version installed on the system · -da or -date = Outputs the date and time the software was installed on the system (LFC) · -h or –help = Outputs complete details about all the available switches associated with swhwinfo · swhwinfo –c –m –o -da List of Supported Console Types GOC5 Will have a VDARC and VIG GOC6 Will have a VDIG List of softwares the product can run 09MW08.10 09MW08.11 08MW33.2 07MW18.4 06MW03.4 05MW31.6 FAQ's Table weight limit - Up to 500 lb. (227 kg) with ± .25 mm positional accuracy Tube type - D3194T D3193T(green) Current production - M4 Options - TBD Links to the updated Product Service Manuals, FMIs, Service Notes, Option Manuals and Operator Documents can be found online at the attached sites. Always use the most appropriate documentation for your system. Done acording to template
- Area
- CT
Full cause & step-by-step resolution
The complete cause analysis, the step-by-step remedy and the attached service documents for this GE Healthcare CT issue are available to FSELIB subscribers — re-authored, web-first, searchable.
7-day free trial · no credit card required