GE Healthcare · MRSigna
The issue is due to an incorrect permission for the device file used to communicate. 15M4B service note on new service p…
The issue is due to an incorrect permission for the device file used to communicate. 15M4B service note on new service procedure for HOS RRI supply.
Symptom
RRI Shim Supply communication failure on 15M4B Software RRI Shim Supply communication failure on 15M4B Software.
Error message
HOS calibration message Opening of RS-232 port failed for shim supply. see long description The following error message is witnessed: Opening of RS-232 port failed for shim supply. Please check the cable connections to the shim supply or disable the communication to Shim supply using Guided Install, if shim supply is not connected.
Applies to
- Models
- Signa
- Product
- Signa HDxT This product is for 1.5T Signa HDxT systems with 15.0 software and HDi systems with 15.0 software. This product is for 1.5T Signa HDxT systems with 15.0 software and HDi systems with 15.0 software.
- Software
- 15.0 For Product Signa HDxT and HDi only. -- NOT to be used with HDe. -- For Product Signa HDxT and HDi only. -- NOT to be used with HDe. --
- Area
- MR
Full cause & step-by-step resolution
The complete cause analysis, the step-by-step remedy for this GE Healthcare MR issue are available to FSELIB subscribers — re-authored, web-first, searchable.
7-day free trial · no credit card required
Related GE Healthcare MR issues
- Running grafidy3, and find there are spikes on the waveforms in the manual prescan display, both windows.
- Fails to Scan with TORSO Coil.
- The Carriage Fails to Advance to Latch to the Table and to Retract When it is Raised, Undocked or Lowered.
- AE title has changed on destination host.
- CWA ID100315. Auto and Manual Prescan Fails.
- What is the Acoustic Noise Level in the Ovation Magnet.