GE Healthcare · MRSigna2236348
CERD Aime Diagnostics fail with error 2236348 and Artifact Due to UCERD.
Symptom
MRIQ: Intermittent Ghosting or Smearing of Images See attached Files. Intermittent ghosting on images. Not specific to any type of scan. No errors are seen in the log when scanning. TPS Diags had failures. Shown below.
Error message
2236348 CERD DIAGS - AIME A Port Memory Failure. Error: 2236348 Host: GEMRPLTN Process: diags File: diagsMain.cc Line: 2332 CERD DIAGS - AIME A Port Memory Failure. AIME A Port Memory (imaginary) has failed the address pattern test. Address: 0000feffH Data exp: 00ff00H Data read: 01ff00H FRU(s): CERD Digital Board
Applies to
- Models
- Signa
- Product
- Signa LX Signa LX Product can be used with 8.x and 9.x systems.
- Software
- 9.1 For Signa LX product only
- Component
- 2221400 UCERD This is the entire UCERD assembly. FE SHOULD ALSO BE TROUBLESHOOTING TO LOWER LEVEL.
- Area
- MR
Full cause & step-by-step resolution
The complete cause analysis, the step-by-step remedy and the attached service documents for this GE Healthcare MR issue are available to FSELIB subscribers — re-authored, web-first, searchable.
7-day free trial · no credit card required
Related GE Healthcare MR issues
- Running grafidy3, and find there are spikes on the waveforms in the manual prescan display, both windows.
- Fails to Scan with TORSO Coil.
- The Carriage Fails to Advance to Latch to the Table and to Retract When it is Raised, Undocked or Lowered.
- AE title has changed on destination host.
- CWA ID100315. Auto and Manual Prescan Fails.
- What is the Acoustic Noise Level in the Ovation Magnet.