GE Healthcare · MRSigna
The RF terminals on the 0.7T NV Array coil seem to be loose.
Design of System.
Symptom
The RF terminals on the 0.7T NV Array coil seem to be loose. Is this a problem. Should these terminals be tightened. See Long Description. The customer or FE notices that the RF terminals that electrically connect the upper and lower halves of the 0.7T NV Array coil seem to be loose. Is this a problem? Should these terminals be tightened? (see photo of coil, below)
Applies to
- Models
- Signa
- Product
- Open Speed with EXCITE For HFO4 and HFO5 only
- Software
- OPENMR5-HFO5 Open Speed with Excite Product
- Area
- MR
Full cause & step-by-step resolution
The complete cause analysis, the step-by-step remedy for this GE Healthcare MR issue are available to FSELIB subscribers — re-authored, web-first, searchable.
7-day free trial · no credit card required
Related GE Healthcare MR issues
- Running grafidy3, and find there are spikes on the waveforms in the manual prescan display, both windows.
- Fails to Scan with TORSO Coil.
- The Carriage Fails to Advance to Latch to the Table and to Retract When it is Raised, Undocked or Lowered.
- AE title has changed on destination host.
- CWA ID100315. Auto and Manual Prescan Fails.
- What is the Acoustic Noise Level in the Ovation Magnet.