GE Healthcare · Nuclear MedicineMillennium
Millennium 3 axis table does not move in Longitude Axis.
Symptom
Millennium 3 axis table does not move in Longitude Axis.
Error message
Motion ended because of a drive fault on the Longitudinal axis
Applies to
- Models
- Millennium
- Product
- MG/MC/Myosight Millennium MG/MC Millennium MyoSIGHT
- Component
- *Patient Table *Patient Table *Patient Table UPG000922 Longitudinal motor MG / MP table UPG000922 Longitudinal motor MG / MP table UPG000922 Longitudinal motor MG / MP table
- Area
- Nuclear Medicine
Full cause & step-by-step resolution
The complete cause analysis, the step-by-step remedy for this GE Healthcare Nuclear Medicine issue are available to FSELIB subscribers — re-authored, web-first, searchable.
7-day free trial · no credit card required
Related GE Healthcare Nuclear Medicine issues
- How do I capture and print COR and Camera Uniformity (CUA) result screens on Genieacq, then send to a processing station for ACR
- Collision and E-stop lights are red on the back of the gantry and no movement with Hand Held Controller (HHC) or the genieacq.
- Need part numbers for the Millennium MG/MC table E-Stop
- How do I Delete a file on Genieacq that the system thinks is still acquiring
- VG, the contour works... but in the opposite way.
- MG_MC_MyoSight_MPR_MPS Bar Phantom Resolution Size