GE Healthcare · MRSigna226124011214279862252239

Guided Install Hardware Tab had the Spectroscopy RF Amplifier selected with No Spectroscopy RF Amplifier Installed in th…

Guided Install Hardware Tab had the Spectroscopy RF Amplifier selected with No Spectroscopy RF Amplifier Installed in the system.

Symptom

Fails TPS Reset when booting up to Applications or when Resetting TPS See Long Description When the MR system is booting up to applications it will fail TPS reset but Applications will successfully boot. With Applications up and "Reset TPS" has been selected, TPS fails to download successfully.

Error message

2261240 ASC BB IF Board was not detected but is configured in MRconfig.cfg. 1121427986 3 1 Fri Jul 15 11:46:26 2005 2261240 2 lx-mr NSP SCP:CanAutoConfig 2597 ASC BB IF Board was not detected but is configured in MRconfig.cfg. If this board is present, verify power, RF Amp and CAN Communication and perform a TPS Reset. If the SSM is present, set usssType=no in MRconfig.cfg and perform a TPS Reset.-> EN 351 SR 162

2252239 Startup Timeout was detected on the Patient Handling Power Supplies. Fri Jul 15 11:46:26 2005 2252239 2 lx-mr NSP SCP:CanAutoConfig 2576 Startup Timeout was detected on the Patient Handling Power Supplies.->

Applies to

Models
Signa
Product
3.0T Signa HDxT For 3.0T Signa HDxT systems with 15.0 software only. For 3.0T Signa HDxT systems with 15.0 software only.
Software
15.0 For Product Signa HDxT and HDi only. -- NOT to be used with HDe. -- For Product Signa HDxT and HDi only. -- NOT to be used with HDe. --
Area
MR

Full cause & step-by-step resolution

The complete cause analysis, the step-by-step remedy for this GE Healthcare MR issue are available to FSELIB subscribers — re-authored, web-first, searchable.

Start free trialSign in

7-day free trial · no credit card required

Related GE Healthcare MR issues