GE Healthcare · MRSigna2238488
Gradient Overload Due to 8645 Gradient Power Module.
Symptom
Will Not Scan with Gradient Errors.
Error message
2238488 The MIF is reporting a long overload on the % axis 8645 Power Module 2238488 The MIF is reporting a long overload on the Y axis 8645 Power Module. The LED on the 8645 for this fault should be lit. If the LED is not lit, check power and cable connections. To clear the fault, power cycle the Y axis HIGH 8645 power module.
Applies to
- Models
- Signa
- Product
- Signa LX Signa LX Product can be used with 8.x and 9.x systems.
- Software
- 9.1 For Signa LX product only
- Component
- 46-328206P115 CROWN A10999-G2 8645 PWR MOD W/CROWB
- Area
- MR
Full cause & step-by-step resolution
The complete cause analysis, the step-by-step remedy for this GE Healthcare MR issue are available to FSELIB subscribers — re-authored, web-first, searchable.
7-day free trial · no credit card required
Related GE Healthcare MR issues
- Running grafidy3, and find there are spikes on the waveforms in the manual prescan display, both windows.
- Fails to Scan with TORSO Coil.
- The Carriage Fails to Advance to Latch to the Table and to Retract When it is Raised, Undocked or Lowered.
- AE title has changed on destination host.
- CWA ID100315. Auto and Manual Prescan Fails.
- What is the Acoustic Noise Level in the Ovation Magnet.