GE Healthcare · MRSigna2225638
Erbtec 52 faults due to a failed Amplifier.
Symptom
Unable to scan with Erbtec errors
Error message
2225638 ERBTEC RF Amplifier Fault 52 IPA Tube heater current unacceptable one second after heater relay was enabled.. Thu Dec 2 09:32:18 2010 Error: 2225638 Host: lx-mr Process: NSP File: HPC_PORT_ID:spi_rf_mon Line: 3060 ERBTEC RF Amplifier fault 52. IPA heater current was unacceptable one second after heater relay was enabled. Possible defective IPA tube, Power Control Board, or harness between tube and Power Control Board.
Applies to
- Models
- Signa
- Product
- Signa LX Signa LX Product can be used with 8.x and 9.x systems.
- Software
- 9.1 For Signa LX product only
- Component
- SecondOpinion Erbtec 20KW RF Amplifier 46-271962P1 This part requires second opinion approval before ordering. See comments in resolution concept for second opinion requirements before ordering this part.
- Area
- MR
Full cause & step-by-step resolution
The complete cause analysis, the step-by-step remedy for this GE Healthcare MR issue are available to FSELIB subscribers — re-authored, web-first, searchable.
7-day free trial · no credit card required
Related GE Healthcare MR issues
- Running grafidy3, and find there are spikes on the waveforms in the manual prescan display, both windows.
- Fails to Scan with TORSO Coil.
- The Carriage Fails to Advance to Latch to the Table and to Retract When it is Raised, Undocked or Lowered.
- AE title has changed on destination host.
- CWA ID100315. Auto and Manual Prescan Fails.
- What is the Acoustic Noise Level in the Ovation Magnet.