GE Healthcare · MRSigna22494321011620
Scan stops with PCI erorr 2249432 Harrier Err Enable Reg due to defective MGD power supply.
Symptom
Intermittent scan stops with PCI error 2249432 Harrier Err Enable TPS clears issue, but reoccurs within 1 hour
Error message
2249432 A PCI error occurred. The MCP820 received a Target Abort. See Long Description Error: 2249432 Host: EMR1 Process: diagCoord File: excLog.c Line: 1389 Task ID: 0x6eca5f0 Time: 1011620 Object: AGP Exception Class: Unknown Function: Software/Firmware/Config: N/A A PCI error occurred. The MCP820 received a Target Abort. Harrier Err Enable Reg: 0xFFF0E000; Harrier Err Status Reg: 0x40000000. Harrier Err Address Reg: 0x09016034; Harrier Err Attribute Reg: 0x0600. Additional information in /usr/g/service/log/vxPciLg-f6f77 and /usr/g/service/log/vxPciSum-f6fa4
Applies to
- Models
- Signa
- Product
- Signa HDxT This product is for 1.5T Signa HDxT systems with 15.0 software and HDi systems with 15.0 software. This product is for 1.5T Signa HDxT systems with 15.0 software and HDi systems with 15.0 software.
- Software
- 15.0 For Product Signa HDxT and HDi only. -- NOT to be used with HDe. -- For Product Signa HDxT and HDi only. -- NOT to be used with HDe. --
- Component
- 5181495-3 400W Quad Output 6Ux8HP cPCI Power Supply This is a replacement for EOPL 2294300-8
- Area
- MR
Full cause & step-by-step resolution
The complete cause analysis, the step-by-step remedy for this GE Healthcare MR issue are available to FSELIB subscribers — re-authored, web-first, searchable.
7-day free trial · no credit card required
Related GE Healthcare MR issues
- Running grafidy3, and find there are spikes on the waveforms in the manual prescan display, both windows.
- Fails to Scan with TORSO Coil.
- The Carriage Fails to Advance to Latch to the Table and to Retract When it is Raised, Undocked or Lowered.
- AE title has changed on destination host.
- CWA ID100315. Auto and Manual Prescan Fails.
- What is the Acoustic Noise Level in the Ovation Magnet.