GE Healthcare · MRSigna2225761
Cannot calibrate SRFD1 due to missing 50 ohm dummy loads
Symptom
Cannot calibrate SRFD1 to full 16 KW power for body mode, trips RFI at less then 10 KW with 2225761
Error message
2225761 - Analogic RF Amplifier 2 Peak Power Fault. Error: 2225761 Host: lx_mr Process: NSP File: HPC_PORT_ID:spi_rf_mon Line: 3066 Analogic RF Amplifier 2 Peak Power Fault. Peak power from Analogic RF Amplifier 2 exceeds specification(69.5-69 .8dbm). Possible causes: RF Interface (RFI) calibration, defective RFI output stage, defective Exciter or defective RF Amplifier 2.
Applies to
- Models
- Signa
- Product
- Signa LX Signa LX Product can be used with 8.x and 9.x systems.
- Software
- 9.1 For Signa LX product only
- Component
- 2224562–4 1 PART 2 50 OHM DUMMY LOAD
- Area
- MR
Full cause & step-by-step resolution
The complete cause analysis, the step-by-step remedy for this GE Healthcare MR issue are available to FSELIB subscribers — re-authored, web-first, searchable.
7-day free trial · no credit card required
Related GE Healthcare MR issues
- Running grafidy3, and find there are spikes on the waveforms in the manual prescan display, both windows.
- Fails to Scan with TORSO Coil.
- The Carriage Fails to Advance to Latch to the Table and to Retract When it is Raised, Undocked or Lowered.
- AE title has changed on destination host.
- CWA ID100315. Auto and Manual Prescan Fails.
- What is the Acoustic Noise Level in the Ovation Magnet.