GE Healthcare · MRSigna2234496
Low signal detected and little signal amplitude during Exciter calibration due to UCERD Receiver.Auto Prescan Failure.Re…
Low signal detected and little signal amplitude during Exciter calibration due to UCERD Receiver.Auto Prescan Failure.Replace UCERD Receiver PN 2206100-wqr.Signa LX.2234496 No or little signal amplitu…
Symptom
Auto Prescan Failure
Error message
2234496 No or little signal amplitude detected during Exciter calibration. Fri Jan 30 16:21:12 1998 Error: 2234496 Host: oc001 Process: NSP File: TPS:cie_exc_cal Line: 455 No or little signal amplitude detected during Exciter calibration. Possible hardware problem - please run CERD Diagnostics!
Applies to
- Models
- Signa
- Product
- Signa LX Signa LX Product can be used with 8.x and 9.x systems.
- Software
- 9.1 For Signa LX product only
- Component
- 2206100 LX UCERD Receiver Same part number is used for Profile4 UCERD receiver.
- Area
- MR
Full cause & step-by-step resolution
The complete cause analysis, the step-by-step remedy for this GE Healthcare MR issue are available to FSELIB subscribers — re-authored, web-first, searchable.
7-day free trial · no credit card required
Related GE Healthcare MR issues
- Running grafidy3, and find there are spikes on the waveforms in the manual prescan display, both windows.
- Fails to Scan with TORSO Coil.
- The Carriage Fails to Advance to Latch to the Table and to Retract When it is Raised, Undocked or Lowered.
- AE title has changed on destination host.
- CWA ID100315. Auto and Manual Prescan Fails.
- What is the Acoustic Noise Level in the Ovation Magnet.