GE Healthcare · MROptimaDiscovery22246662248346
Can't scan due to PSD Waveform Generation Failed messages.
Symptom
Can't scan due to PSD Waveform Generation Failed messages
Error message
2224666 Auto Prescan failed, Pulse generation failed. Probable PSD software error. Pulse generation timed out. It may be necessary to perform a TPS Reset. 2248346 Pulse generation failed. Probable PSD software error. 2248346 MMCN NSP SCP:sct_prep_or_start 417 Pulse generation failed. Probable PSD software error. Pulse generation timed out. It may be necessary to perform a TPS Reset.
Applies to
- Models
- Optima, Discovery
- Product
- Optima MR450W Wide bore magnet. Not Discovery750 or Discovery450.
- Software
- 21.0 Only for Optima MR450W (wide bore) systems. (Not to be used on Discovery MR450 or Discovery MR750). Only for Optima MR450W (wide bore) systems. (Not to be used on Discovery MR450 or Discovery MR750).
- Area
- MR
Full cause & step-by-step resolution
The complete cause analysis, the step-by-step remedy for this GE Healthcare MR issue are available to FSELIB subscribers — re-authored, web-first, searchable.
7-day free trial · no credit card required
Related GE Healthcare MR issues
- CWA ID100513. Will Not Scan with Gradient Errors.
- Multicoil Bias Fault errors on multiple coils.
- Corrupt Image Database.
- Auto Prescan Failures and RF amp setup incomplete Errors Due to Defective RF amp.
- The system is unable to scan with any surface coil, get dynamic disable faults.
- CWA ID103384. Computer Will Not Boot with the message on the screen that says Do Not Interact With System.