GE Healthcare · MRSigna2258106
Lower Legacy port Coil ID fails due to bent pin 7 on J20 connector of SRI.
Symptom
CoilID does not work on bottom legacy port only. See Long Description Upper legacy and both A nd B ports work normally. When coil is plugged into lower legacy port, coil ID light goes red then switches to green after about 6 seconds, but no coil ID is ever read by system.
Error message
2258106 Coil Check Host coil validation error: Coil ID not found in CoilConfig.cfg file. Connector: 2258106 Host: MAINMR Process: coilCK File: coilCK_scp.c Line: 989 Exception Class: Unknown Function: Host: Coil Check Host coil validation error: Coil ID not found in CoilConfig.cfg file. Connector: Multicoil A Port Coil ID: SENTO1LA3LnrAinqRNcBLCl7dG5x0j4z.
Applies to
- Models
- Signa
- Product
- Signa HDxT This product is for 1.5T Signa HDxT systems with 15.0 software and HDi systems with 15.0 software. This product is for 1.5T Signa HDxT systems with 15.0 software and HDi systems with 15.0 software.
- Software
- 15.0 For Product Signa HDxT and HDi only. -- NOT to be used with HDe. -- For Product Signa HDxT and HDi only. -- NOT to be used with HDe. --
- Area
- MR
Full cause & step-by-step resolution
The complete cause analysis, the step-by-step remedy for this GE Healthcare MR issue are available to FSELIB subscribers — re-authored, web-first, searchable.
7-day free trial · no credit card required
Related GE Healthcare MR issues
- Running grafidy3, and find there are spikes on the waveforms in the manual prescan display, both windows.
- Fails to Scan with TORSO Coil.
- The Carriage Fails to Advance to Latch to the Table and to Retract When it is Raised, Undocked or Lowered.
- AE title has changed on destination host.
- CWA ID100315. Auto and Manual Prescan Fails.
- What is the Acoustic Noise Level in the Ovation Magnet.