GE Healthcare · MRSigna
Unable to Ping Dicom Host due to Wrong Port Number in the PACs Configuration in the Remote Hosts List on the Scanner.Can…
Unable to Ping Dicom Host due to Wrong Port Number in the PACs Configuration in the Remote Hosts List on the Scanner.Cannot Connect to Dicom Destination.Corrrect DICOM Port Number Configuration-wqr.Si…
Symptom
Cannot Connect to Dicom Destination. Unable to Ping Dicom Host In this case this was a Radworks system that the site was trying to configure. They could perform a lower level ping, but not a Ping Dicom hosts from the applications Network pull down.
Applies to
- Models
- Signa
- Product
- Signa LX Signa LX Product can be used with 8.x and 9.x systems.
- Software
- 9.1 For Signa LX product only
- Area
- MR
Full cause & step-by-step resolution
The complete cause analysis, the step-by-step remedy for this GE Healthcare MR issue are available to FSELIB subscribers — re-authored, web-first, searchable.
7-day free trial · no credit card required
Related GE Healthcare MR issues
- Running grafidy3, and find there are spikes on the waveforms in the manual prescan display, both windows.
- Fails to Scan with TORSO Coil.
- The Carriage Fails to Advance to Latch to the Table and to Retract When it is Raised, Undocked or Lowered.
- AE title has changed on destination host.
- CWA ID100315. Auto and Manual Prescan Fails.
- What is the Acoustic Noise Level in the Ovation Magnet.